0
LMC6035-Q1
  • LMC6035-Q1
  • LMC6035-Q1
  • LMC6035-Q1

LMC6035-Q1

ACTIVE

Automotive-grade, dual, 15.5-V, 1.4-MHz operational amplifier

Texas Instruments LMC6035-Q1 Product Info

1 April 2026 5

Parameters

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

15.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2

Rail-to-rail

In to V-, Out

GBW (typ) (MHz)

1.4

Slew rate (typ) (V/µs)

1.5

Vos (offset voltage at 25°C) (max) (mV)

5

Iq per channel (typ) (mA)

0.4

Vn at 1 kHz (typ) (nV√Hz)

27

Rating

Automotive

Operating temperature range (°C)

-40 to 85

Offset drift (typ) (µV/°C)

2.3

Input bias current (max) (pA)

0.2

CMRR (typ) (dB)

96

Iout (typ) (A)

0.005

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.5

Input common mode headroom (to positive supply) (typ) (V)

-0.5

Output swing headroom (to negative supply) (typ) (V)

0.07

Output swing headroom (to positive supply) (typ) (V)

-0.08

Package

SOIC (D)-8-29.4 mm² 4.9 x 6

Features

  • AEC-Q100 qualified for automotive applications
    • Temperature grade 3: –40°C to +85°C, TA
  • Typical unless otherwise noted
  • Specified 2.7V, 3V, 5V, and 15V performance
  • Specified for 2kΩ and 600Ω loads
  • Wide operating range: 2.0V to 15.5V
  • Ultra-low input current: 20fA
  • Rail-to-rail output swing
    • At 600Ω: 200mV from either rail at 2.7V
    • At 100kΩ: 5mV from either rail at 2.7V
  • High voltage gain: 126dB
  • Wide input common-mode voltage range
    • –0.1V to +2.3V at VS = 2.7V
  • Low distortion: 0.01% at 10kHz
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 3: –40°C to +85°C, TA
  • Typical unless otherwise noted
  • Specified 2.7V, 3V, 5V, and 15V performance
  • Specified for 2kΩ and 600Ω loads
  • Wide operating range: 2.0V to 15.5V
  • Ultra-low input current: 20fA
  • Rail-to-rail output swing
    • At 600Ω: 200mV from either rail at 2.7V
    • At 100kΩ: 5mV from either rail at 2.7V
  • High voltage gain: 126dB
  • Wide input common-mode voltage range
    • –0.1V to +2.3V at VS = 2.7V
  • Low distortion: 0.01% at 10kHz

Description

The LMC6035-Q1 is an economical, low-voltage op amp capable of rail-to-rail output swing into loads of 600Ω. These devices also feature a well behaved decrease in specifications at supply voltages less than the specified 2.7V operation. This decrease provides a comfort zone for adequate operation at voltages significantly less than 2.7V. The ultra low input current (IB) makes this device and excellent choice for low-power, active-filter applications because a low IB allows the use of higher resistor values and lower capacitor values. In addition, the drive capability of the LMC6035-Q1 makes this op amp an excellent choice in a broad range of applications for low-voltage systems.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request