0
LM74680
  • LM74680
  • LM74680
  • LM74680

LM74680

ACTIVE

100V Ideal diode bridge controller for low loss rectification

Texas Instruments LM74680 Product Info

1 April 2026 7

Parameters

Vin (max) (V)

80

Vin (min) (V)

5

FET

External single FET

Device type

Ideal diode bridge controller

Number of channels

4

Rating

Catalog

Features

Enable, Full bridge diode rectifier controller, Linear control, Reverse current blocking, Reverse polarity protection

Iq (typ) (mA)

0.27

Iq (max) (mA)

0.45

IGate source (typ) (µA)

160

IGate sink (typ) (mA)

100

Operating temperature range (°C)

-40 to 125

VSense reverse (typ) (mV)

-1

Design support

EVM

VGS (max) (V)

14

Shutdown current (ISD) (mA) (A)

0.0000382

Product type

Ideal diode controller

Package

WSON (DRR)-12-9 mm² 3 x 3

Features

  • Input operating voltage range: 5V to 80V
    • 100V absolute maximum
  • 4× integrated gate drive control
  • 165µA gate pull-up strength
  • 100mA gate pull-down strength
  • Linear gate regulation control for supply ORing applications
    • VTG_REG = 11mV
  • Enable pin for user-controlled device on/off function
  • –40°C to 125°C operating junction temperature range
  • Small footprint: 3mm × 3mm VQFN-12

    • Meets IPC-9592 spacing rules
  • Input operating voltage range: 5V to 80V
    • 100V absolute maximum
  • 4× integrated gate drive control
  • 165µA gate pull-up strength
  • 100mA gate pull-down strength
  • Linear gate regulation control for supply ORing applications
    • VTG_REG = 11mV
  • Enable pin for user-controlled device on/off function
  • –40°C to 125°C operating junction temperature range
  • Small footprint: 3mm × 3mm VQFN-12

    • Meets IPC-9592 spacing rules

Description

The LM74680 is an ideal diode bridge controller that provides voltage rectification by driving four N-channel MOSFETs in a full-bridge configuration. LM74680 enables lower voltage drop and reduced power dissipation as compared to conventional diode bridge rectifiers. This helps to simplify the power supply design, eliminate heat sinks, and reduce PCB area. The integrated charge pump allows use of N-channel MOSFETs, which are smaller and more cost-effective than P-channel MOSFETs for the same power level. It also offers fast response to reverse current conditions for protection against input short events. The LM74680 has an enable pin which allows for the gate driver to be either enabled or disabled by an external signal. The LM74680 supports voltage rectification from DC to 1kHz.

This device is characterized for operation over a junction temperature range of –40°C to +125°C.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request