0
LM5127-Q1
  • LM5127-Q1
  • LM5127-Q1

LM5127-Q1

ACTIVE

42V wide-Vin triple buck and boost controller for automotive applications

Texas Instruments LM5127-Q1 Product Info

1 April 2026 4

Parameters

Regulated outputs (#)

3

Vin (min) (V)

0.8

Vin (max) (V)

42

Vout (min) (V)

0.8

Vout (max) (V)

42

Iout (max) (A)

30

Configurability

Hardware configurable, User programmable

TI functional safety category

Functional Safety-Capable

Features

Enable, Overcurrent protection, Overvoltage protection, Power good, Thermal shutdown

Rating

Automotive

Operating temperature range (°C)

-40 to 150

Step-down DC/DC controller

2

Step-up DC/DC controller

1

Iq (typ) (mA)

3

Switching frequency (max) (kHz)

2200

Shutdown current (ISD) (typ) (µA)

2.2

Package

VQFN (RGZ)-48-49 mm² 7 x 7

Features

  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • Suited for various architectures and scalable
    • Triple-output synchronous controllers
    • Flexible topology
      • CH1: boost / buck topology
      • CH2, CH3: two single phase bucks / dual-phase interleaved buck topology
    • Enable pin and PGOOD indicator per channel
    • Optional low IQ battery monitor
  • Wide operating range for automotive applications
    • 3.8-V to 42-V input operating range
    • Minimum boost input 0.8 V when BIAS ≥ 3.8 V
    • Boost output: adjustable up to 42 V
    • Buck output: fixed 3.3 V, 5 V, or adj. 0.8 - 42 V
    • Bypass operation when VSUPPLY>VLOAD (boost)
    • LDO operation when VSUPPLY ≈ VLOAD (buck)
  • Minimized battery drain
    • Shutdown current ≤ 2.8 µA
    • Automatic transition to low-IQ sleep mode
    • Battery drain in sleep
      • IQ≤ 14 µA when 3.3-V buck on
      • IQ≤ 22 µA when 3.3-V and 5-V bucks on
      • IQ≤ 32 µA when 3.3-V, 5-V bucks on and boost in bypass
    • High efficiency using strong 5-V drivers
    • Dual input VCC and VDD regulators
  • Small and cost-effective solution
    • Maximum switching frequency 2.2 MHz
    • Internal boot diode (boost)
    • Constant peak current limit
    • Supports DCR inductor current sensing
    • QFN-48 with wettable flanks
  • Avoid AM band interference and crosstalk
    • Optional clock synchronization
    • Switching frequency from 100 kHz to 2.2 MHz
    • Selectable switching mode (FPWM, diode emulation, and skip mode)
  • EMI mitigation
    • Optional programmable spread spectrum
  • Programmability and flexibility
    • Programmable wake-up and sleep threshold
    • Dynamic switching frequency programming
    • Adjustable soft start time
    • Adjustable output using 0.8 V ±1% reference
    • Adaptive dead-time control
  • Integrated protection features
    • Overcurrent protection
      • Cycle-by-cycle peak current limit
      • Optional hiccup mode protection (buck)
      • Optional latch-off mode protection (buck)
    • Overvoltage protection
    • HB-SW short protection (boost)
    • Thermal shutdown
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • Suited for various architectures and scalable
    • Triple-output synchronous controllers
    • Flexible topology
      • CH1: boost / buck topology
      • CH2, CH3: two single phase bucks / dual-phase interleaved buck topology
    • Enable pin and PGOOD indicator per channel
    • Optional low IQ battery monitor
  • Wide operating range for automotive applications
    • 3.8-V to 42-V input operating range
    • Minimum boost input 0.8 V when BIAS ≥ 3.8 V
    • Boost output: adjustable up to 42 V
    • Buck output: fixed 3.3 V, 5 V, or adj. 0.8 - 42 V
    • Bypass operation when VSUPPLY>VLOAD (boost)
    • LDO operation when VSUPPLY ≈ VLOAD (buck)
  • Minimized battery drain
    • Shutdown current ≤ 2.8 µA
    • Automatic transition to low-IQ sleep mode
    • Battery drain in sleep
      • IQ≤ 14 µA when 3.3-V buck on
      • IQ≤ 22 µA when 3.3-V and 5-V bucks on
      • IQ≤ 32 µA when 3.3-V, 5-V bucks on and boost in bypass
    • High efficiency using strong 5-V drivers
    • Dual input VCC and VDD regulators
  • Small and cost-effective solution
    • Maximum switching frequency 2.2 MHz
    • Internal boot diode (boost)
    • Constant peak current limit
    • Supports DCR inductor current sensing
    • QFN-48 with wettable flanks
  • Avoid AM band interference and crosstalk
    • Optional clock synchronization
    • Switching frequency from 100 kHz to 2.2 MHz
    • Selectable switching mode (FPWM, diode emulation, and skip mode)
  • EMI mitigation
    • Optional programmable spread spectrum
  • Programmability and flexibility
    • Programmable wake-up and sleep threshold
    • Dynamic switching frequency programming
    • Adjustable soft start time
    • Adjustable output using 0.8 V ±1% reference
    • Adaptive dead-time control
  • Integrated protection features
    • Overcurrent protection
      • Cycle-by-cycle peak current limit
      • Optional hiccup mode protection (buck)
      • Optional latch-off mode protection (buck)
    • Overvoltage protection
    • HB-SW short protection (boost)
    • Thermal shutdown

Description

The LM5127-Q1 is a full featured, wide input range three channel DC/DC controller which supports flexible topology (Boost/Buck) with peak current mode control. The device is designed as an integrated one-chip solution for the front-stage power supply in automotive infotainment, cluster, body control as well as ADAS systems. (continue on next page)

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request