0
LM5030
  • LM5030
  • LM5030
  • LM5030
  • LM5030

LM5030

ACTIVE

100-V push-pull current mode PWM controller

Texas Instruments LM5030 Product Info

1 April 2026 6

Parameters

Topology

Push pull

Control mode

Current

Features

Current limiting, Multi-topology, Programmable slope compensation, Soft start, Synchronization pin

Duty cycle (max) (%)

49

Package

VSSOP (DGS)-10-14.7 mm² 3 x 4.9

Features

  • Internal High-Voltage Start-Up Regulator
  • Single Resistor Oscillator Setting
  • Synchronizable
  • Error Amplifier
  • Precision Reference
  • Adjustable Softstart
  • Dual Mode Overcurrent Protection
  • Slope Compensation
  • Direct Optocoupler Interface
  • 1.5-A Peak Gate Drivers
  • Thermal Shutdown
  • Internal High-Voltage Start-Up Regulator
  • Single Resistor Oscillator Setting
  • Synchronizable
  • Error Amplifier
  • Precision Reference
  • Adjustable Softstart
  • Dual Mode Overcurrent Protection
  • Slope Compensation
  • Direct Optocoupler Interface
  • 1.5-A Peak Gate Drivers
  • Thermal Shutdown

Description

The LM5030 high-voltage PWM controller contains all of the features needed to implement push-pull and bridge topologies, using current-mode control in a small 10-pin package. This device provides two alternating gate driver outputs. The LM5030 includes a high-voltage start-up regulator that operates over a wide input range of 14 V to 100 V. Additional features include: error amplifier, precision reference, dual mode current limit, slope compensation, softstart, sync capability, and thermal shutdown. This high speed IC has total propagation delays less than 100 ns and a 1-MHz capable single-resistor adjustable oscillator.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request