0
LM318
  • LM318
  • LM318
  • LM318

LM318

ACTIVE

Single, 40-V, 15-MHz operational amplifier

Texas Instruments LM318 Product Info

1 April 2026 10

Parameters

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

40

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

10

Rail-to-rail

No

GBW (typ) (MHz)

15

Slew rate (typ) (V/µs)

70

Vos (offset voltage at 25°C) (max) (mV)

10

Iq per channel (typ) (mA)

4.5

Vn at 1 kHz (typ) (nV√Hz)

15

Rating

Catalog

Operating temperature range (°C)

0 to 70

Offset drift (typ) (µV/°C)

6

Input bias current (max) (pA)

500000

CMRR (typ) (dB)

100

Iout (typ) (A)

0.02

Architecture

Bipolar

Input common mode headroom (to negative supply) (typ) (V)

3.5

Input common mode headroom (to positive supply) (typ) (V)

-3.5

Output swing headroom (to negative supply) (typ) (V)

2

Output swing headroom (to positive supply) (typ) (V)

-2

Package

PDIP (P)-8-92.5083 mm² 9.81 x 9.43

Features

  • Small Signal Bandwidth . . . 15 MHz Typ
  • Slew Rate . . . 50 V/µs Min
  • Bias Current . . . 250 nA Max (LM118, LM218)
  • Supply Voltage Range . . . ±5 V to ±20 V
  • Internal Frequency Compensation
  • Input and Output Overload Protection
  • Same Pin Assignments as General-Purpose Operational Amplifiers

The LM118 and LM218 are obsolete and are no longer supplied.

  • Small Signal Bandwidth . . . 15 MHz Typ
  • Slew Rate . . . 50 V/µs Min
  • Bias Current . . . 250 nA Max (LM118, LM218)
  • Supply Voltage Range . . . ±5 V to ±20 V
  • Internal Frequency Compensation
  • Input and Output Overload Protection
  • Same Pin Assignments as General-Purpose Operational Amplifiers

The LM118 and LM218 are obsolete and are no longer supplied.

Description

The LM118, LM218, and LM318 are precision, fast operational amplifiers designed for applications requiring wide bandwidth and high slew rate. They feature a factor-of-ten increase in speed over general-purpose devices without sacrificing dc performance.

These operational amplifiers have internal unity-gain frequency compensation. This considerably simplifies their application because no external components are necessary for operation. However, unlike most internally compensated amplifiers, external frequency compensation may be added for optimum performance. For inverting applications, feed-forward compensation boosts the slew rate to over 150 V/µs and almost double the bandwidth. Overcompensation can be used with the amplifier for greater stability when maximum bandwidth is not needed. Further, a single capacitor can be added to reduce the settling time for 0.1% error band to under 1 µs.

The high speed and fast settling time of these operational amplifiers make them useful in A/D converters, oscillators, active filters, sample-and-hold circuits, and general-purpose amplifiers.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request