0
INA951-SEP
  • INA951-SEP

INA951-SEP

PREVIEW

Space-enhanced-product, -4V to 80V, 1.3MHz current-sense amplifier

Texas Instruments INA951-SEP Product Info

1 April 2026 4

Parameters

Product type

Analog output

Common-mode voltage (max) (V)

80

Common-mode voltage (min) (V)

-4

Input offset (±) (max) (µV)

150

Input offset drift (±) (typ) (µV/°C)

0.05

Features

High frequency

Rating

Space

Voltage gain (V/V)

20

CMRR (min) (dB)

140

Bandwidth (kHz)

1300

Supply voltage (max) (V)

10

Supply voltage (min) (V)

2.7

Iq (max) (mA)

2.25

Number of channels

1

Comparators (#)

0

Gain error (%)

0.15

Slew rate (V/µs)

2.5

Operating temperature range (°C)

-55 to 125

Package

SOT-23 (DBV)-5-8.12 mm² 2.9 x 2.8

Features

  • VID In Progress
  • Radiation - Total Ionizing Dose (TID):
    • TID performance assurance up to 30krad(Si)
    • Radiation Lot Acceptance Testing (RLAT) for every wafer lot up to 30krad(Si)
  • Radiation - Single-Event Effects (SEE):
    • Single Event Latch-Up (SEL) immune up to 43MeV-cm2 /mg at 125°C
    • Single Event Transient (SET) characterized up to LET = 47.5MeV-cm2 /mg
  • Supports defense, aerospace, and medical applications
    • Operating temperature from –55°C to +125°C
    • Controlled baseline
    • Au bondwire and NiPdAu lead finish
    • Outgassing test performed per ASTM E595
    • One fabrication, assembly, and test site
    • Extended product life cycle
    • Product traceability
  • Wide common-mode voltage:
    • Operational voltage: −4V to +80V
    • Survival voltage: −20V to +85V
  • Excellent CMRR:
    • 160dB DC-CMRR
    • 85dB AC-CMRR at 50kHz
  • Accuracy:
    • Gain:
      • Gain error: ±0.15% (maximum)
      • Gain drift: ±10ppm/ °C (maximum)
    • Offset:
      • Offset voltage: ±30µV (typical)
      • Offset drift: ±0.05µV/ °C (typical)
  • Available gain:
    • INA951-SEPA1, : 20V/V
  • High bandwidth: 1.3MHz
  • Slew rate: 2.5V/µs
  • Quiescent current: 1.5mA
  • VID In Progress
  • Radiation - Total Ionizing Dose (TID):
    • TID performance assurance up to 30krad(Si)
    • Radiation Lot Acceptance Testing (RLAT) for every wafer lot up to 30krad(Si)
  • Radiation - Single-Event Effects (SEE):
    • Single Event Latch-Up (SEL) immune up to 43MeV-cm2 /mg at 125°C
    • Single Event Transient (SET) characterized up to LET = 47.5MeV-cm2 /mg
  • Supports defense, aerospace, and medical applications
    • Operating temperature from –55°C to +125°C
    • Controlled baseline
    • Au bondwire and NiPdAu lead finish
    • Outgassing test performed per ASTM E595
    • One fabrication, assembly, and test site
    • Extended product life cycle
    • Product traceability
  • Wide common-mode voltage:
    • Operational voltage: −4V to +80V
    • Survival voltage: −20V to +85V
  • Excellent CMRR:
    • 160dB DC-CMRR
    • 85dB AC-CMRR at 50kHz
  • Accuracy:
    • Gain:
      • Gain error: ±0.15% (maximum)
      • Gain drift: ±10ppm/ °C (maximum)
    • Offset:
      • Offset voltage: ±30µV (typical)
      • Offset drift: ±0.05µV/ °C (typical)
  • Available gain:
    • INA951-SEPA1, : 20V/V
  • High bandwidth: 1.3MHz
  • Slew rate: 2.5V/µs
  • Quiescent current: 1.5mA

Description

The INA951-SEP is a current sense amplifier that can measure voltage drops across shunt resistors over a wide common-mode range from –4V to 80V. The negative common-mode voltage allows the device to operate below ground, thus accommodating precise measurement of recirculating currents in half-bridge applications. The combination of a low offset voltage, small gain error and high DC CMRR enables highly accurate current measurement. The INA951-SEP is not only designed for DC current measurement, but also for high-speed applications (ex. Fast over-current protection) with a high bandwidth of 1.3MHz and an 85dB AC CMRR (at 50kHz).

The INA951-SEP operates from a single 2.7V to 10V supply, drawing 1.5mA of supply current. The INA951-SEP is available with a gain option of 20V/V.

The INA951-SEP is specified over an operating temperature range of −40°C to +125°C and is offered in a space-saving SOT-23 package.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request