0
INA630
  • INA630
  • INA630

INA630

ACTIVE

Precision, low-power, indirect current feedback instrumentation amplifier

Texas Instruments INA630 Product Info

1 April 2026 4

Parameters

Number of channels

1

Vs (max) (V)

36

Vs (min) (V)

4.5

Input offset (±) (max) (µV)

250

Voltage gain (min) (V/V)

20

Voltage gain (max) (V/V)

1000

Noise at 1 kHz (typ) (nV√Hz)

40

Features

Super Beta

CMRR (min) (dB)

130

Input offset drift (±) (max) (µV/°C)

2

Input bias current (±) (max) (nA)

10

Iq (typ) (mA)

0.3

Bandwidth at min gain (typ) (MHz)

0.55

Gain error (±) (max) (%)

0.1

Operating temperature range (°C)

-40 to 125

Rating

Catalog

Type

Resistor

Gain nonlinearity (±) (max) (%)

0.001

Input common mode headroom (to negative supply) (typ) (V)

1.5

Input common mode headroom (to positive supply) (typ) (V)

-1.5

Noise at 0.1 Hz to 10 Hz (typ) (µVPP)

2

Package

SOT-23-THN (DDF)-8-8.12 mm² 2.9 x 2.8

Features

  • Optimized for cost and size sensitive applications
  • Super-beta bipolar precision:
    • High common-mode rejection: 126dB (minimum) for G = 20V/V to 1000V/V
    • Low offset voltage: 60µV (typical), 350µV (maximum)
    • Low offset voltage drift: 0.7µV/°C (typical), 2µV/°C (maximum)
    • Low gain non-linearity: 10ppm (G = 100V/V) (maximum)
    • High power supply rejection: 123dB (minimum) for G = 20V/V to 1000V/V
    • Voltage noise density: 40nV/√Hz at f = 1kHz
  • Gain set with external resistor divider for G ≥ 20V/V
    • Maximum differential input voltages of ±125mV
  • Bandwidth: 550kHz (G = 20), 100kHz (G = 100)
  • Supply range:
    • Single-supply: 4.5V to 36V
    • Dual-supply: ±2.25V to ±18V
    • Supply current: 300µA (typical)
  • Specified temperature range: –40°C to +125°C
  • Optimized for cost and size sensitive applications
  • Super-beta bipolar precision:
    • High common-mode rejection: 126dB (minimum) for G = 20V/V to 1000V/V
    • Low offset voltage: 60µV (typical), 350µV (maximum)
    • Low offset voltage drift: 0.7µV/°C (typical), 2µV/°C (maximum)
    • Low gain non-linearity: 10ppm (G = 100V/V) (maximum)
    • High power supply rejection: 123dB (minimum) for G = 20V/V to 1000V/V
    • Voltage noise density: 40nV/√Hz at f = 1kHz
  • Gain set with external resistor divider for G ≥ 20V/V
    • Maximum differential input voltages of ±125mV
  • Bandwidth: 550kHz (G = 20), 100kHz (G = 100)
  • Supply range:
    • Single-supply: 4.5V to 36V
    • Dual-supply: ±2.25V to ±18V
    • Supply current: 300µA (typical)
  • Specified temperature range: –40°C to +125°C

Description

The INA630 is a high-precision instrumentation amplifier that offers low power consumption and operates over a wide single-supply or dual-supply range. The INA630 is optimized for small differential voltages (±125mV maximum) while providing excellent common-mode suppression (126dB CMRR). The INA630 offers flexible gain setting with an external resistor divider of minimum G = 20V/V.

The INA630 is based on an indirect current feedback architecture that offers low gain error and non-linearity. Due to the architecture the reference pin impedance does not degrade the CMRR performance. The device enables wider input and output voltage range compared to traditional instrumentation amplifiers. The device has high precision as a result of super-beta input transistors, which provide low input offset voltage, offset voltage drift, low bias current and current noise.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request