0
INA223
  • INA223
  • INA223

INA223

ACTIVE

26V, programmable-gain current sense amplifier & analog power monitor

Texas Instruments INA223 Product Info

1 April 2026 5

Parameters

Product type

Analog output

Common-mode voltage (max) (V)

26

Common-mode voltage (min) (V)

0

Input offset (±) (max) (µV)

100, 150, 300

Input offset drift (±) (typ) (µV/°C)

0.6

Features

I2C, Programmable Gain

Rating

Catalog

Voltage gain (V/V)

20, 128, 300

CMRR (min) (dB)

100

Bandwidth (kHz)

10, 20, 25

Supply voltage (max) (V)

5.5

Supply voltage (min) (V)

2.7

Iq (max) (mA)

0.25

Number of channels

1

Comparators (#)

0

Gain error (%)

0.25, 0.5, 1

Gain error drift (±) (max) (ppm/°C)

50

Slew rate (V/µs)

0.25

Operating temperature range (°C)

-40 to 105

Package

WSON (DSK)-10-6.25 mm² 2.5 x 2.5

Features

  • Wide Common-Mode Range: 0 V to 26 V
  • ±100 µV Offset (Max, Gain = 300 V/V)
  • Accuracy
    • ±0.25% Shunt Voltage Gain Error (Max)
    • ±0.15% Bus Voltage Gain Error (Max)
    • 1.25% Power Error (Max)
    • 0.3 µV/°C Offset Drift (Max)
    • 50 ppm/°C Gain Drift (Max)
  • Programmable Gains
    • Current Shunt Voltage Gains: 20, 128, 300
    • Bus Voltage Attenuations: 1/10, 1/5, 2/5
  • Monitors/Measures/Reports:
    • Instantaneous Power
    • Bus Voltage
    • Load Current
  • Quiescent Current: 250 µA (Max)
  • Shutdown Current: 1 µA (Max)
  • Wide Common-Mode Range: 0 V to 26 V
  • ±100 µV Offset (Max, Gain = 300 V/V)
  • Accuracy
    • ±0.25% Shunt Voltage Gain Error (Max)
    • ±0.15% Bus Voltage Gain Error (Max)
    • 1.25% Power Error (Max)
    • 0.3 µV/°C Offset Drift (Max)
    • 50 ppm/°C Gain Drift (Max)
  • Programmable Gains
    • Current Shunt Voltage Gains: 20, 128, 300
    • Bus Voltage Attenuations: 1/10, 1/5, 2/5
  • Monitors/Measures/Reports:
    • Instantaneous Power
    • Bus Voltage
    • Load Current
  • Quiescent Current: 250 µA (Max)
  • Shutdown Current: 1 µA (Max)

Description

The INA223 is a voltage-output device that monitors the current, bus voltage, and power of a supply line by sensing a voltage drop across a shunt at common-mode voltages from 0 V to 26 V. The common-mode voltage range is independent of the supply voltage. The low offset of the Zerø-Drift architecture enables current sensing with maximum drops across the shunt as low as 10 mV, full-scale.

The INA223 includes a two-wire interface used for adjusting the configuration settings of the device. The interface is used to control the signal (current shunt voltage, bus voltage, or power) that is directed to the device output. Multiple gain and attenuation settings can be programmed through the two-wire interface to allow for application-specific configurations. The programmable gain feature also allows the device to be operated over a much wider dynamic current load range without having to switch the sensing element used.

A shutdown feature is available to disable the device and effectively disconnect it from the shunt resistor and supply voltage, thus reducing the drain on the battery.

The INA223 operates from a single +2.7-V to +5.5-V supply, drawing a maximum supply current of 250 µA. It is specified over the extended temperature range of –40°C to +105°C, and is offered in an SON-10 package.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request