0
INA1620
  • INA1620
  • INA1620

INA1620

ACTIVE

High-fidelity audio operational amplifier with integrated thin-film resistors and EMI filtering

Texas Instruments INA1620 Product Info

1 April 2026 3

Parameters

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

36

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

4

Vos (offset voltage at 25°C) (max) (mV)

1

Offset drift (typ) (µV/°C)

0.5

Input bias current (max) (pA)

2000000

GBW (typ) (MHz)

32

Features

Burr-Brown™ Audio, High Cload Drive, Premium Sound, Shutdown, Small Size

Slew rate (typ) (V/µs)

10

Rail-to-rail

No

Iq per channel (typ) (mA)

2.6

Vn at 1 kHz (typ) (nV√Hz)

2.8

CMRR (typ) (dB)

127

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Iout (typ) (A)

0.145

Architecture

Bipolar

Input common mode headroom (to negative supply) (typ) (V)

1.5

Input common mode headroom (to positive supply) (typ) (V)

-1

Output swing headroom (to negative supply) (typ) (V)

0.8

Output swing headroom (to positive supply) (typ) (V)

-0.8

THD + N at 1 kHz (typ) (%)

0.000025

Package

WQFN (RTW)-24-16 mm² 4 x 4

Features

  • High-Quality Thin-Film Resistors
    Matched to 0.004% (Typical)
  • Integrated EMI Filters
  • Ultra-low Noise: 2.8 nV/√Hz at 1 kHz
  • Ultra-low Total Harmonic Distortion + Noise:
    –119 dB THD+N (142 mW/Ch Into 32 Ω/Ch)
  • Wide Gain Bandwidth Product:
    32 MHz (G = +1000)
  • High Slew Rate: 10 V/µs
  • High Capacitive-Load Drive Capability: > 600 pF
  • High Open-Loop Gain: 136 dB (600-Ω Load)
  • Low Quiescent Current: 2.6 mA per Channel
  • Low-Power Shutdown Mode With Reduced Pop-and-Click Noise: 5 µA per Channel
  • Short-Circuit Protection
  • Wide Supply Range: ±2 V to ±18 V
  • Available in Small 24-pin WQFN Package
  • High-Quality Thin-Film Resistors
    Matched to 0.004% (Typical)
  • Integrated EMI Filters
  • Ultra-low Noise: 2.8 nV/√Hz at 1 kHz
  • Ultra-low Total Harmonic Distortion + Noise:
    –119 dB THD+N (142 mW/Ch Into 32 Ω/Ch)
  • Wide Gain Bandwidth Product:
    32 MHz (G = +1000)
  • High Slew Rate: 10 V/µs
  • High Capacitive-Load Drive Capability: > 600 pF
  • High Open-Loop Gain: 136 dB (600-Ω Load)
  • Low Quiescent Current: 2.6 mA per Channel
  • Low-Power Shutdown Mode With Reduced Pop-and-Click Noise: 5 µA per Channel
  • Short-Circuit Protection
  • Wide Supply Range: ±2 V to ±18 V
  • Available in Small 24-pin WQFN Package

Description

The INA1620 integrates 4 precision-matched thin-film resistor pairs and EMI filtering on-chip with a low-distortion, high output current, dual audio operational amplifier. The amplifier achieves a very low,
2.8-nV/√Hz noise density with an ultra-low THD+N of –119.2 dB at 1 kHz and drives a 32-Ω load at 150-mW output power. The integrated thin-film resistors are matched to within 0.004% and can be used to create a large number of very high-performance audio circuits.

The INA1620 operates over a very wide supply range of ±2 V to ±18 V on only 2.6 mA of supply current per channel. The INA1620 also has a shutdown mode, allowing the amplifiers to be switched from normal operation to a standby current that is typically less than 5 µA. Shutdown mode is specifically designed to eliminate click-and-pop noise when transitioning into or out of shutdown mode.

The INA1620 has a unique internal layout for lowest crosstalk, and freedom from interactions between channels, even when overdriven or overloaded. This device is specified from –40°C to +125°C.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request