0
DRV8844
  • DRV8844
  • DRV8844

DRV8844

ACTIVE

60V, 2.5A quad half-bridge motor driver, bipolar (+/-30V) supply and independent half-bridge control

Texas Instruments DRV8844 Product Info

1 April 2026 11

Parameters

Control interface

Hardware (GPIO)

Control mode

Independent 1/2-Bridge, PWM

Sleep current (mA)

0.5

Vs (max) (V)

60

Vs (min) (V)

8

Vs ABS (max) (V)

65

Peak output current (A)

2.5

Operating temperature range (°C)

-40 to 125

Rating

Catalog

Topology

Push-Pull

Package

HTSSOP (PWP)-28-62.08 mm² 9.7 x 6.4

Features

  • Quad 1/2-H-Bridge DC Motor Driver
    • Can Drive Four Solenoids, Two DC Motors, One Stepper Motor, or Other Loads
    • Full Individual Half Bridge Control
    • Low MOSFET On-Resistance
  • 2.5A Maximum Drive Current at 24V, 25°C
  • Floating Input Buffers Allow Dual (Bipolar) Supplies (up to ±30V)
  • Built-In 3.3V, 10mA LDO Regulator
  • Industry Standard IN/IN Digital Control Interface
  • 8V to 60V Operating Supply Voltage Range
  • Outputs Can Be Connected in Parallel
  • Thermally Enhanced Surface Mount Package
  • Quad 1/2-H-Bridge DC Motor Driver
    • Can Drive Four Solenoids, Two DC Motors, One Stepper Motor, or Other Loads
    • Full Individual Half Bridge Control
    • Low MOSFET On-Resistance
  • 2.5A Maximum Drive Current at 24V, 25°C
  • Floating Input Buffers Allow Dual (Bipolar) Supplies (up to ±30V)
  • Built-In 3.3V, 10mA LDO Regulator
  • Industry Standard IN/IN Digital Control Interface
  • 8V to 60V Operating Supply Voltage Range
  • Outputs Can Be Connected in Parallel
  • Thermally Enhanced Surface Mount Package

Description

The DRV8844 provides four individually controllable 1/2-H-bridge drivers. The device can be used to drive two DC motors, one stepper motor, four solenoids, or other loads. The output driver channel for each channel consists of N-channel power MOSFET’s configured in a 1/2-H-bridge configuration.

The DRV8844 can supply up to 2.5A peak or 1.75A RMS output current per channel (with proper PCB heatsinking at 24V and 25°C) per H-bridge.

Separate inputs to independently control each 1/2-H-bridge are provided. To allow operation with split supplies, the logic inputs and nFAULT output are referenced to a separate floating ground pin.

Internal shutdown functions are provided for over current protection, short circuit protection, undervoltage lockout, and overtemperature.

The DRV8844 is available in a 28-pin HTSSOP package with PowerPAD™ (Eco-friendly: RoHS & no Sb/Br).

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request