0
DRV8801A-Q1
  • DRV8801A-Q1

DRV8801A-Q1

ACTIVE

Automotive 40-V, 2.8-A H-bridge motor driver with current feedback with wettable flank QFN packag

Texas Instruments DRV8801A-Q1 Product Info

1 April 2026 5

Parameters

Number of full bridges

1

Vs (min) (V)

6.5

Vs ABS (max) (V)

40

Peak output current (A)

2.8

RDS(ON) (HS + LS) (mΩ)

830

Sleep current (µA)

10

Control mode

PH/EN

Control interface

Hardware (GPIO)

Features

Current sense Amplifier

Topology

Integrated FET

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Package

WQFN (RMJ)-16-16 mm² 4 x 4

Features

  • Qualified for Automotive Applications
  • Low ON-Resistance (0.83 Ω) Outputs
  • Low-Power Sleep Mode
  • 100% PWM Duty Cycle Supported
  • 6.5 to 36-V Operating Supply Voltage Range
  • Thermally Enhanced Surface-Mount Package
  • Configurable Overcurrent Limit
  • Protection Features
    • VBB Undervoltage Lockout (UVLO)
    • Overcurrent Protection (OCP)
    • Short-to-Supply Protection
    • Short-to-Ground Protection
    • Overtemperature Warning (OTW)
    • Overtemperature shutdown (OTS)
    • Overcurrent and Overtemperature Fault Conditions Indicated On Pin (nFAULT)
  • Qualified for Automotive Applications
  • Low ON-Resistance (0.83 Ω) Outputs
  • Low-Power Sleep Mode
  • 100% PWM Duty Cycle Supported
  • 6.5 to 36-V Operating Supply Voltage Range
  • Thermally Enhanced Surface-Mount Package
  • Configurable Overcurrent Limit
  • Protection Features
    • VBB Undervoltage Lockout (UVLO)
    • Overcurrent Protection (OCP)
    • Short-to-Supply Protection
    • Short-to-Ground Protection
    • Overtemperature Warning (OTW)
    • Overtemperature shutdown (OTS)
    • Overcurrent and Overtemperature Fault Conditions Indicated On Pin (nFAULT)

Description

The DRV8801A-Q1 device provides a versatile motor-driver solution with a full H-bridge driver. The device can drive a brushed DC motor or one winding of a stepper motor, as well as other devices like solenoids. A simple PHASE and ENABLE interface allows easy interfacing to controller circuits.

The output stages use N-channel power MOSFETs configured as an H-bridge. The DRV8801A-Q1 device is capable of peak output currents up to ±2.8 A and operating voltages up to 36 V. An internal charge pump generates required gate drive voltages.

A low-power sleep mode is provided which shuts down internal circuitry to achieve very low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin.

Internal protection functions are provided undervoltage lockout, overcurrent protection, short-to-supply protection, short-to-ground protection, overtemperature warning, and overtemperature shutdown. Overcurrent (including short-to-ground and short-to-supply) and overtemperature fault conditions are indicated via an nFAULT pin.

The DRV8801A-Q1 device is packaged in a 16-pin WQFN package with wettable flanks and exposed thermal pad (Eco-friendly: RoHS & no Sb/Br).

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request