0
DLPA1000
  • DLPA1000

DLPA1000

ACTIVE

PMIC/LED Driver for DLP2000 (0.2 nHD) DMD

Texas Instruments DLPA1000 Product Info

1 April 2026 5

Parameters

Processor supplier

Texas Instruments

Processor name

DLP2000

Regulated outputs (#)

3

Step-down DC/DC converter

0

Step-up DC/DC converter

1

LDO

2

Vin (min) (V)

2.7

Vin (max) (V)

6

Iout (max) (A)

2.5

Configurability

Factory programmable

Features

Enable pin, Overcurrent protection, Power sequencing, SPI control

Rating

Catalog

Operating temperature range (°C)

-10 to 85

Step-down DC/DC controller

0

Step-up DC/DC controller

0

Iq (typ) (mA)

12

Switching frequency (max) (kHz)

2250

Shutdown current (ISD) (typ) (µA)

10

Switching frequency (typ) (kHz)

2250

Package

DSBGA (YFF)-49-9 mm² 3 x 3

Features

  • High-Efficiency RGB LED Driver With Buck-Boost DC-to-DC Converter and Integrated MOSFETS
  • Six Low-Impedance (<100 mΩ) MOSFET Switches for Channel Selection
  • Independent, 10-Bit Current Control per Channel
  • DMD Regulators
    • Requires Only a Single Inductor
    • VOFS: 8.5 V
    • VBIAS: 16 V
    • VRST: –10 V
  • Reset Generation and Power Supply Sequencing
  • RGB LED Strobe Decoder Supports:
    • Common-Anode RGBs
    • Cathode-Cathode-Anode RGBs
  • 33-MHz Serial Peripheral Interface (SPI)
  • Multiplexer for Measuring Analog Signals
    • Battery Voltage
    • LED Voltage, LED Current
    • Light Sensor (for White Point Correction)
    • External Temperature Sensor
  • Monitoring and Protection Circuits
    • Hot Die Warning and Thermal Shutdown
    • Low-Battery and Undervoltage Lockout
    • Overcurrent and Undervoltage Protection
  • 49-Ball 0.4-mm Pitch, DSBGA Package
  • High-Efficiency RGB LED Driver With Buck-Boost DC-to-DC Converter and Integrated MOSFETS
  • Six Low-Impedance (<100 mΩ) MOSFET Switches for Channel Selection
  • Independent, 10-Bit Current Control per Channel
  • DMD Regulators
    • Requires Only a Single Inductor
    • VOFS: 8.5 V
    • VBIAS: 16 V
    • VRST: –10 V
  • Reset Generation and Power Supply Sequencing
  • RGB LED Strobe Decoder Supports:
    • Common-Anode RGBs
    • Cathode-Cathode-Anode RGBs
  • 33-MHz Serial Peripheral Interface (SPI)
  • Multiplexer for Measuring Analog Signals
    • Battery Voltage
    • LED Voltage, LED Current
    • Light Sensor (for White Point Correction)
    • External Temperature Sensor
  • Monitoring and Protection Circuits
    • Hot Die Warning and Thermal Shutdown
    • Low-Battery and Undervoltage Lockout
    • Overcurrent and Undervoltage Protection
  • 49-Ball 0.4-mm Pitch, DSBGA Package

Description

DLPA1000 is a dedicated PMIC / RGB LED driver for the DLP2000 Digital Micromirror Devices (DMD) when used with a DLPC2607 digital controller. For reliable operation of these chipsets, it is mandatory to use the DLPA1000.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request