0
CC1354P10
  • CC1354P10
  • CC1354P10

CC1354P10

ACTIVE

SimpleLink™ Arm® Cortex®-M33 multiband wireless MCU with EdgeAI support, 1MB + 296KB, +20dBm

Texas Instruments CC1354P10 Product Info

1 April 2026 14

Parameters

Protocols

6LoWPAN, Amazon Sidewalk, Bluetooth low energy, IEEE 802.15.4, MIOTY, Matter, Proprietary, Thread, Wi-SUN, Wireless M-Bus, Zigbee

Modulation scheme

(G)MSK, 2(G)FSK, 4(G)FSK, ASK, OOK

Frequency bands

1076-1315, 2360-2500, 287-351, 359-439, 431-527, 861-1054

Type

Wireless MCU

TX power (max) (dBm)

20

RAM (kByte)

296

Flash memory (kByte)

1024

CPU

Arm® Cortex®-M33

Operating system

FreeRTOS, RTOS, TI RTOS

Peripherals

12-bit ADC 8-channel, 2 comparators, 4 SPI, 4 UART, 4 timers, 8-bit DAC, I2C, I2S, Sensor controller

Number of GPIOs

26, 42

Rating

Catalog

Operating temperature range (°C)

-40 to 105

Edge AI enabled

Edge AI Studio enabled, Yes

Package

VQFN (RGZ)-48-49 mm² 7 x 7

Features

Wireless microcontroller

  • Powerful 48 MHz Arm Cortex-M33 processor with TrustZone
  • FPU and DSP extension
  • 1024 kB flash program memory
  • 8 kB of cache SRAM
  • 256 kB of ultra-low leakage SRAM with parity for high-reliability operation
    • ­32 kB of additional SRAM is available if parity is disabled
  • Dual-band Sub-1 GHz and 2.4 GHz operation
  • Dynamic multiprotocol manager (DMM) driver
  • Programmable radio includes support for 2- (G)FSK, 4-(G)FSK, MSK, OOK, IEEE 802.15.4 PHY and MAC
  • Supports over-the-air upgrade (OTA)

Ultra-low power sensor controller

  • Autonomous MCU with 4 kB of SRAM
  • Sample, store, and process sensor data
  • Fast wake-up for low-power operation
  • Software defined peripherals; capacitive touch, flow meter, LCD

Low power consumption

  • MCU consumption:
    • 3.4 mA active mode, CoreMark
    • 71 µA/MHz running CoreMark
    • 0.98 µA standby mode, RTC, 256 kB RAM
    • 0.17 µA shutdown mode, wake-up on pin
  • Ultra low-power sensor controller consumption
    • 32 µA in 2 MHz mode
    • 849 µA in 24 MHz mode
  • Radio consumption:
    • 5.8 mA RX at 868 MHz
    • 6.9 mA RX at 2.4 GHz
    • 22 mA TX at +10 dBm at 2.4 GHz
    • 25.8 mA TX at +14 dBm at 868 MHz
    • 69 mA TX at +20 dBm at 915 MHz
    • 101 mA TX at +20 dBm at 2.4 GHz

Wireless protocol support

High performance radio

  • Up to 130 dB link budget at 50 kbps, 868 MHz
  • Up to 141 dB link budget at 2.5 kbps, 868 MHz
  • –­121 dBm for 2.5 kbps long-range mode
  • –­110 dBm at 50 kbps, 802.15.4, 868 MHz
  • –104 dBm for Bluetooth® Low Energy 125 kbps
  • –105 dBm for IEEE 802.15.4-2006 2.4 GHz OQPSK (coherent modem)
  • Output power up to +20 dBm with temperature compensation

Regulatory compliance

  • Designed for systems targeting compliance with these standards:
    • ETSI EN 300 220 Receiver Cat. 1.5 and 2, EN 300 328, EN 303 131, EN 303 204, EN 300 440 Cat. 2 and 3
    • FCC CFR47 Part 15
    • ARIB STD-T66, STD-T67 and STD-T108

MCU peripherals

  • Most digital peripherals can be routed to any GPIO
  • Four 32-bit or eight 16-bit general-purpose timers
  • 12-bit SAR ADC, 200 ksps, 8 channels
  • 8-bit DAC
  • Two comparators
  • Programmable current source
  • Four UART, four SPI, two I2C, one I2S
  • Real-time clock (RTC)
  • Integrated temperature and battery monitor

Security enablers

  • Supports secure boot
  • Supports secure key storage and device ID
  • Arm TrustZone for trusted execution environment
  • AES 128- and 256-bit cryptographic accelerator
  • Public key accelerator
  • SHA2 accelerator (full suite up to SHA-512)
  • True random number generator (TRNG)
  • Secure debug lock
  • Software anti-rollback protection

Development tools and software

Operating range

  • On-chip buck DC/DC converter
  • 1.8 V to 3.8 V single supply voltage
  • –40°C to +105°C

Package

  • 7 mm × 7 mm RGZ VQFN48 (26 GPIOs)
  • 8 mm × 8 mm RSK VQFN64 (42 GPIOs)
  • RoHS-compliant package

Wireless microcontroller

  • Powerful 48 MHz Arm Cortex-M33 processor with TrustZone
  • FPU and DSP extension
  • 1024 kB flash program memory
  • 8 kB of cache SRAM
  • 256 kB of ultra-low leakage SRAM with parity for high-reliability operation
    • ­32 kB of additional SRAM is available if parity is disabled
  • Dual-band Sub-1 GHz and 2.4 GHz operation
  • Dynamic multiprotocol manager (DMM) driver
  • Programmable radio includes support for 2- (G)FSK, 4-(G)FSK, MSK, OOK, IEEE 802.15.4 PHY and MAC
  • Supports over-the-air upgrade (OTA)

Ultra-low power sensor controller

  • Autonomous MCU with 4 kB of SRAM
  • Sample, store, and process sensor data
  • Fast wake-up for low-power operation
  • Software defined peripherals; capacitive touch, flow meter, LCD

Low power consumption

  • MCU consumption:
    • 3.4 mA active mode, CoreMark
    • 71 µA/MHz running CoreMark
    • 0.98 µA standby mode, RTC, 256 kB RAM
    • 0.17 µA shutdown mode, wake-up on pin
  • Ultra low-power sensor controller consumption
    • 32 µA in 2 MHz mode
    • 849 µA in 24 MHz mode
  • Radio consumption:
    • 5.8 mA RX at 868 MHz
    • 6.9 mA RX at 2.4 GHz
    • 22 mA TX at +10 dBm at 2.4 GHz
    • 25.8 mA TX at +14 dBm at 868 MHz
    • 69 mA TX at +20 dBm at 915 MHz
    • 101 mA TX at +20 dBm at 2.4 GHz

Wireless protocol support

High performance radio

  • Up to 130 dB link budget at 50 kbps, 868 MHz
  • Up to 141 dB link budget at 2.5 kbps, 868 MHz
  • –­121 dBm for 2.5 kbps long-range mode
  • –­110 dBm at 50 kbps, 802.15.4, 868 MHz
  • –104 dBm for Bluetooth® Low Energy 125 kbps
  • –105 dBm for IEEE 802.15.4-2006 2.4 GHz OQPSK (coherent modem)
  • Output power up to +20 dBm with temperature compensation

Regulatory compliance

  • Designed for systems targeting compliance with these standards:
    • ETSI EN 300 220 Receiver Cat. 1.5 and 2, EN 300 328, EN 303 131, EN 303 204, EN 300 440 Cat. 2 and 3
    • FCC CFR47 Part 15
    • ARIB STD-T66, STD-T67 and STD-T108

MCU peripherals

  • Most digital peripherals can be routed to any GPIO
  • Four 32-bit or eight 16-bit general-purpose timers
  • 12-bit SAR ADC, 200 ksps, 8 channels
  • 8-bit DAC
  • Two comparators
  • Programmable current source
  • Four UART, four SPI, two I2C, one I2S
  • Real-time clock (RTC)
  • Integrated temperature and battery monitor

Security enablers

  • Supports secure boot
  • Supports secure key storage and device ID
  • Arm TrustZone for trusted execution environment
  • AES 128- and 256-bit cryptographic accelerator
  • Public key accelerator
  • SHA2 accelerator (full suite up to SHA-512)
  • True random number generator (TRNG)
  • Secure debug lock
  • Software anti-rollback protection

Development tools and software

Operating range

  • On-chip buck DC/DC converter
  • 1.8 V to 3.8 V single supply voltage
  • –40°C to +105°C

Package

  • 7 mm × 7 mm RGZ VQFN48 (26 GPIOs)
  • 8 mm × 8 mm RSK VQFN64 (42 GPIOs)
  • RoHS-compliant package

Description

The SimpleLink™CC1354P10 device is a multiprotocol and multi-band Sub-1 GHz and 2.4 GHz wireless microcontroller (MCU) supporting Thread, Zigbee , Bluetooth 5.3 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), mioty, Wi-SUN, Amazon Sidewalk, proprietary systems, including the TI 15.4-Stack (Sub-1 GHz and 2.4 GHz), and concurrent multiprotocol through a Dynamic Multiprotocol Manager (DMM) driver. The device is optimized for low-power wireless communications, with advanced security features and on-chip over-the-air (OAD) update capability. It enables long range and reliable communication in building security systems, HVAC, smart meters, medical, wired networking, portable electronics, home theater & entertainment, and connected peripherals markets. The highlighted features of this device include:

  • Arm TrustZone based secure key storage, device ID and trusted functions support.
  • Multi-band device supporting concurrent multiprotocol for both Sub-1 GHz and 2.4 GHz through a DMM driver.
  • Wide flexibility of protocol stack support in the SimpleLink LOWPOWER F2 Software Development Kit (SDK).
  • Enablement of long-range and low-power applications using the integrated +20 dBm high-power amplifier with best-in-class transmit current consumption at 64 mA for Sub-1 GHz and 101 mA for 2.4 GHz operation.
  • Maximum transmit power of +14 dBm at Sub-1 GHz with 24.9 mA and +5 dBm at 2.4 GHz with 9.6 mA current consumption.
  • Optimized for coin-cell operation at +10 dBm at 2.4 GHz with 22 mA current consumption.
  • Longer battery life wireless applications with low standby current of 0.98 µA and full RAM retention.
  • Industrial temperature ready with lowest standby current of 5 µA at 85 ⁰C.
  • Advanced sensing with a programmable, autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1 Hz ADC sampling at 1 µA system current.
  • Low Soft Error Rate (SER) Failure-in-Time (FIT) for long operation lifetime with no disruption for industrial markets with always-on SRAM parity against corruption due to potential radiation events.
  • Dedicated software controlled radio controller (Arm Cortex-M0) providing flexible low-power RF transceiver capability to support multiple physical layers and RF standards.
  • Excellent radio sensitivity (-121 dBm) and robustness (selectivity and blocking) performance for SimpleLink™ long-range mode.

The CC1354P10 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub-1 GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit SimpleLink MCU platform.

In addition to the software compatibility, within the multi-band wireless MCUs, there is pin-to-pin compatibility from 352 kB of flash up to 1 MB of flash in the 7 × 7 mm QFN package for maximum design scalability. For more information on TIs Sub-1 GHz solutions, visit www.ti.com/sub1ghz

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request