0
BQ33100
  • BQ33100

BQ33100

ACTIVE

Fully integrated, single chip, super capacitor health manager

Texas Instruments BQ33100 Product Info

1 April 2026 14

Parameters

Cell chemistry

SuperCap

Number of series cells

2-4 Cells, >4 Cells

Communication interface

I2C, SMBus

Battery capacity (min) (mAh)

0

Battery capacity (max) (mAh)

65534

Implementation

Pack

External capacity indication

None

Operating temperature range (°C)

-40 to 85

Cell balancing

External

Rating

Catalog

Package

TSSOP (PW)-24-49.92 mm² 7.8 x 6.4

Features

  • Fully integrated 2-, 3-, 4-, and 5-series Super Capacitor Manager
  • Can be used with up to 9-series capacitors without individual integrated capacitor monitoring and balancing
  • Active capacitor voltage balancing
    • Prevents super capacitor overvoltage during charging
  • Capacitor health monitoring
    • Capacitance learning
    • ESR measurement
    • Operation status
    • State-of-charge
    • State-of-health
    • Charging voltage and current reports
    • Safety alerts with optional pin indication
  • Integrated protection monitoring and control
    • Overvoltage
    • Short circuit
    • Excessive temperature
    • Excessive capacitor leakage
  • 2-wire SMBus serial communications
  • High-accuracy 16-bit delta-sigma ADC with a 16-channel multiplexer for measurement
    • Used for voltage, current, and temperature
  • Low power consumption
    • < 660 µA in NORMAL operating mode
    • < 1 µA in SHUTDOWN mode
  • Wide operating temperature: –40°C to +85°C
  • Fully integrated 2-, 3-, 4-, and 5-series Super Capacitor Manager
  • Can be used with up to 9-series capacitors without individual integrated capacitor monitoring and balancing
  • Active capacitor voltage balancing
    • Prevents super capacitor overvoltage during charging
  • Capacitor health monitoring
    • Capacitance learning
    • ESR measurement
    • Operation status
    • State-of-charge
    • State-of-health
    • Charging voltage and current reports
    • Safety alerts with optional pin indication
  • Integrated protection monitoring and control
    • Overvoltage
    • Short circuit
    • Excessive temperature
    • Excessive capacitor leakage
  • 2-wire SMBus serial communications
  • High-accuracy 16-bit delta-sigma ADC with a 16-channel multiplexer for measurement
    • Used for voltage, current, and temperature
  • Low power consumption
    • < 660 µA in NORMAL operating mode
    • < 1 µA in SHUTDOWN mode
  • Wide operating temperature: –40°C to +85°C

Description

The Texas Instruments BQ33100 Super Capacitor Manager is a fully integrated, single-chip solution that provides a rich array of features for charge control, monitoring, and protection for either 2-, 3-, 4-, or 5-series super capacitors with individual capacitor monitoring and balancing or up to 9-series capacitors with only the stack voltage being measured. With a small footprint of 7.8 mm × 6.4 mm in a compact 24-pin TSSOP package, the BQ33100 maximizes functionality and safety while dramatically increasing ease of use and cutting the solution cost and size for super capacitor applications.

Using its integrated high-performance analog peripherals, the BQ33100 battery manager measures and maintains an accurate record of available capacitance, state-of-health, voltage, current, temperature, and other critical parameters in super capacitors, and reports the information to the system host controller over a 2-wire SMBus 1.1 compatible interface.

The BQ33100 provides firmware-controlled protection on overvoltage, overtemperature, and overcharge, along with hardware-controlled protection for overcurrent in discharge and short circuit protection during charge and discharge.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request