0
ADS5237
  • ADS5237

ADS5237

ACTIVE

Dual-Channel, 10-Bit, 65-MSPS Analog-to-Digital Converter (ADC)

Texas Instruments ADS5237 Product Info

1 April 2026 2

Parameters

Sample rate (max) (Msps)

65

Resolution (Bits)

10

Number of input channels

2

Interface type

Parallel CMOS

Analog input BW (MHz)

300

Features

Low Power

Rating

Catalog

Peak-to-peak input voltage range (V)

2

Power consumption (typ) (mW)

330

Architecture

Pipeline

SNR (dB)

61.7

ENOB (Bits)

9.9

SFDR (dB)

86

Operating temperature range (°C)

-40 to 85

Input buffer

No

Package

TQFP (PAG)-64-144 mm² 12 x 12

Features

  • Single +3.3V Supply
  • High SNR: 61.7dBFS at fIN = 5MHz
  • Total Power Dissipation:
    Internal Reference: 366mW
    External Reference: 330mW
  • Internal or External Reference
  • Low DNL: ±0.1LSB
  • Flexible Input Range: 1.5VPP to 2VPP
  • TQFP-64 Package
  • APPLICATIONS
    • Communications IF Processing
    • Communications Base Stations
    • Test Equipment
    • Medical Imaging
    • Video Digitizing
    • CCD Digitizing

All other trademarks are the property of their respective owners

  • Single +3.3V Supply
  • High SNR: 61.7dBFS at fIN = 5MHz
  • Total Power Dissipation:
    Internal Reference: 366mW
    External Reference: 330mW
  • Internal or External Reference
  • Low DNL: ±0.1LSB
  • Flexible Input Range: 1.5VPP to 2VPP
  • TQFP-64 Package
  • APPLICATIONS
    • Communications IF Processing
    • Communications Base Stations
    • Test Equipment
    • Medical Imaging
    • Video Digitizing
    • CCD Digitizing

All other trademarks are the property of their respective owners

Description

The ADS5237 is a dual, high-speed, high dynamic range, 10-bit, pipelined analog-to-digital converter (ADC). This device includes a high-bandwidth sample-and-hold amplifier that gives excellent spurious performance up to and beyond the Nyquist rate. The differential nature of the sample-and-hold amplifier and ADC circuitry minimizes even-order harmonics and gives excellent common-mode noise immunity.

The ADS5237 provides for setting the full-scale range of the converter without any external reference circuitry. The internal reference can be disabled, allowing low-drive, external references to be used for improved tracking in multichannel systems.

The ADS5237 provides an over-range indicator flag to indicate an input signal that exceeds the full-scale input range of the converter. This flag can be used to reduce the gain of front-end gain control circuitry. There is also an output enable pin to allow for multiplexing and testing on a printed circuit board (PCB).

The ADS5237 employs digital error correction techniques to provide excellent differential linearity for demanding imaging applications. The ADS5237 is available in a TQFP-64 package.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request