0
ADS2806
  • ADS2806

ADS2806

ACTIVE

Dual-Channel, 12-Bit, 32-MSPS Analog-to-Digital Converter (ADC)

Texas Instruments ADS2806 Product Info

1 April 2026 3

Parameters

Sample rate (max) (Msps)

32

Resolution (Bits)

12

Number of input channels

2

Interface type

Parallel CMOS

Analog input BW (MHz)

270

Features

Low Power

Rating

Catalog

Peak-to-peak input voltage range (V)

2, 3

Power consumption (typ) (mW)

430

Architecture

Pipeline

SNR (dB)

69.2

ENOB (Bits)

10.7

SFDR (dB)

73.5

Operating temperature range (°C)

-40 to 85

Input buffer

No

Package

HTQFP (PAP)-64-144 mm² 12 x 12

Features

  • SPURIOUS-FREE DYNAMIC RANGE:
       73dB at 10MHz fIN
  • HIGH SNR: 67dB (2Vp-p), 69dB (3Vp-p)
  • INTERNAL OR EXTERNAL REFERENCE
  • LOW DLE: ±0.4LSB
  • FLEXIBLE INPUT RANGE: 2Vp-p to 3Vp-p
  • TQFP-64 POWER PACKAGE
  • APPLICATIONS
    • COMMUNICATIONS IF PROCESSING
    • COMMUNICATIONS BASESTATIONS
    • TEST EQUIPMENT
    • MEDICAL IMAGING
    • VIDEO DIGITIZING
    • CCD DIGITIZING

  • SPURIOUS-FREE DYNAMIC RANGE:
       73dB at 10MHz fIN
  • HIGH SNR: 67dB (2Vp-p), 69dB (3Vp-p)
  • INTERNAL OR EXTERNAL REFERENCE
  • LOW DLE: ±0.4LSB
  • FLEXIBLE INPUT RANGE: 2Vp-p to 3Vp-p
  • TQFP-64 POWER PACKAGE
  • APPLICATIONS
    • COMMUNICATIONS IF PROCESSING
    • COMMUNICATIONS BASESTATIONS
    • TEST EQUIPMENT
    • MEDICAL IMAGING
    • VIDEO DIGITIZING
    • CCD DIGITIZING

Description

The ADS2806 is a dual, high-speed, high dynamic range, 12-bit pipelined Analog-to-Digital Converter (ADC). This converter includes a high-bandwidth track-and-hold that gives excellent spurious performance up to and beyond the Nyquist rate. The differential nature of this track-and-hold and ADC circuitry minimizes even-order harmonics and gives excellent common-mode noise immunity. The track-and-hold can also be operated single-ended.

The ADS2806 provides for setting the full-scale range of the converter without any external reference circuitry. The internal reference can be disabled allowing low drive, external references to be used for improved tracking in multichannel systems.

The ADS2806 provides an over-range indicator flag to indicate an input signal that exceeds the full-scale input range of the converter. This flag can be used to reduce the gain of front end gain control circuitry. There is also an output enable pin to allow for multiplexing and testability on a PC board.

The ADS2806 employs digital error correction techniques to provide excellent differential linearity for demanding imaging applications. The ADS2806 is available in a TQFP-64 power package.