0
ADS1282-SP
  • ADS1282-SP
  • ADS1282-SP

ADS1282-SP

ACTIVE

High-resolution analog-to-digital converter (ADC)

Texas Instruments ADS1282-SP Product Info

1 April 2026 5

Parameters

Resolution (Bits)

31

Sample rate (max) (ksps)

4

Number of input channels

2

Interface type

SPI

Architecture

Delta-Sigma

Input type

Differential

Multichannel configuration

Multiplexed

Rating

Space

Reference mode

External

Input voltage range (max) (V)

1.15, 3.75

Input voltage range (min) (V)

-1.9, 0.7

Features

PGA

Operating temperature range (°C)

-55 to 125

Power consumption (typ) (mW)

25

Analog supply voltage (min) (V)

-2.5, 0

Analog supply voltage (max) (V)

2.5, 5

SNR (dB)

130

Digital supply (min) (V)

1.65

Digital supply (max) (V)

3.6

Package

CFP (HKV)-28-231.521 mm² 18.23 x 12.7

Features

  • QMLV (QML Class V) MIL-PRF-38535 Qualified and Radiation Hardness Assured (RHA), SMD 5962-14231
    • 5962L1423101VXC - Qualified over the Military Temperature Range (–55°C to 125°C)
    • 5962L1423102VXC - Qualified over Reduced Temperature Range (–55°C to 115°C) for Improved Dynamic Performance
  • 5962L14231:
    • Radiation Hardness Assurance (RHA) up to Total Ionizing Dose (TID) 50 kRAD (Si)
    • Single Event Latchup (SEL) Immune to LET = 50 MeV-cm2/mg at 125°C
    • Single Event Latchup (SEL) Immune to LET = 60 MeV-cm2/mg at 85°C
  • High Resolution: 124-dB SNR (1000 SPS)
  • High Accuracy: THD: –102 dB
    INL: 0.5 ppm
  • Low-Noise PGA
  • Two-Channel Input MUX
  • Inherently-Stable Modulator With Fast Responding Over-Range Detection
  • Flexible Digital Filter:
    • Sinc + FIR + IIR (Selectable)
    • Linear or Minimum Phase Response
    • Programmable High-Pass Filter
    • Selectable FIR Data Rates:
      250 SPS to 4 kSPS
  • Filter Bypass Option
  • Low-Power Consumption: 25 mW
  • Offset and Gain Calibration Engine
  • SYNC Input
  • Analog Supply: Unipolar (5 V) or Bipolar (±2.5 V)
  • Digital Supply: 1.75 to 3.3 V
  • QMLV (QML Class V) MIL-PRF-38535 Qualified and Radiation Hardness Assured (RHA), SMD 5962-14231
    • 5962L1423101VXC - Qualified over the Military Temperature Range (–55°C to 125°C)
    • 5962L1423102VXC - Qualified over Reduced Temperature Range (–55°C to 115°C) for Improved Dynamic Performance
  • 5962L14231:
    • Radiation Hardness Assurance (RHA) up to Total Ionizing Dose (TID) 50 kRAD (Si)
    • Single Event Latchup (SEL) Immune to LET = 50 MeV-cm2/mg at 125°C
    • Single Event Latchup (SEL) Immune to LET = 60 MeV-cm2/mg at 85°C
  • High Resolution: 124-dB SNR (1000 SPS)
  • High Accuracy: THD: –102 dB
    INL: 0.5 ppm
  • Low-Noise PGA
  • Two-Channel Input MUX
  • Inherently-Stable Modulator With Fast Responding Over-Range Detection
  • Flexible Digital Filter:
    • Sinc + FIR + IIR (Selectable)
    • Linear or Minimum Phase Response
    • Programmable High-Pass Filter
    • Selectable FIR Data Rates:
      250 SPS to 4 kSPS
  • Filter Bypass Option
  • Low-Power Consumption: 25 mW
  • Offset and Gain Calibration Engine
  • SYNC Input
  • Analog Supply: Unipolar (5 V) or Bipolar (±2.5 V)
  • Digital Supply: 1.75 to 3.3 V

Description

The ADS1282-SP is a radiation-tolerant extremely high-performance, single-chip analog-to-digital converter (ADC) with an integrated, low-noise programmable gain amplifier (PGA) and two-channel input multiplexer (MUX). ADS1282-SP is suitable for the demanding needs of space applications providing ultra-precision performance while maintaining radiation tolerance suitable for a large variety of satellites, payloads, sensing and other harsh environment applications.

The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise and linearity performance. The modulator is used either in conjunction with the on-chip digital filter, or can be bypassed for use with post processing filters.

The flexible input MUX provides an additional external input for measurement, as well as internal self-test connections. The PGA features outstanding low noise (5 nV/√Hz) and high input impedance, allowing easy interfacing to transducers over a wide range of gains.

The digital filter provides selectable data rates from 250 to 4000 samples per second (SPS). The high-pass filter (HPF) features an adjustable corner frequency. On-chip gain and offset scaling registers support system calibration.

The synchronization input (SYNC) can be used to synchronize the conversions of multiple ADS1282s. The SYNC input also accepts a clock input for continuous alignment of conversions from an external source.

Together, the amplifier, modulator, and filter dissipate 30 mW. The ADS1282-SP is fully specified from –55°C to 125°C.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request