0
ADS1113-Q1
  • ADS1113-Q1
  • ADS1113-Q1
  • ADS1113-Q1

ADS1113-Q1

ACTIVE

Automotive 16-Bit 860SPS 1-Ch Delta-Sigma ADC With Oscillator, Voltage Reference, and I2C

Texas Instruments ADS1113-Q1 Product Info

1 April 2026 6

Parameters

Resolution (Bits)

16

Sample rate (max) (ksps)

0.86

Number of input channels

1

Interface type

I2C

Architecture

Delta-Sigma

Input type

Differential, Single-ended

Rating

Automotive

TI functional safety category

Functional Safety-Capable

Reference mode

Internal

Input voltage range (max) (V)

5.5

Input voltage range (min) (V)

0

Features

Oscillator

Operating temperature range (°C)

-40 to 125

Power consumption (typ) (mW)

0.3

Analog supply voltage (min) (V)

2

Analog supply voltage (max) (V)

5.5

Digital supply (min) (V)

2

Digital supply (max) (V)

5.5

Package

UQFN (NKS)-10-3.2 mm² 2 x 1.6

Features

  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • Wide supply range: 2.0 V to 5.5 V
  • Low current consumption:
    • 150 µA (continuous-conversion mode)
  • Programmable data rate:
    • 8 SPS to 860 SPS
  • Single-cycle settling
  • Internal low-drift voltage reference
  • Internal oscillator
  • I2C interface: Four pin-selectable addresses
  • Family of devices:
    • ADS1113-Q1: 1 single-ended or differential input
    • ADS1114-Q1: 1 single-ended or differential input with comparator and PGA
    • ADS1115-Q1: 4 single-ended or 2 differential inputs with comparator and PGA
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • Wide supply range: 2.0 V to 5.5 V
  • Low current consumption:
    • 150 µA (continuous-conversion mode)
  • Programmable data rate:
    • 8 SPS to 860 SPS
  • Single-cycle settling
  • Internal low-drift voltage reference
  • Internal oscillator
  • I2C interface: Four pin-selectable addresses
  • Family of devices:
    • ADS1113-Q1: 1 single-ended or differential input
    • ADS1114-Q1: 1 single-ended or differential input with comparator and PGA
    • ADS1115-Q1: 4 single-ended or 2 differential inputs with comparator and PGA

Description

The ADS1113-Q1, ADS1114-Q1, and ADS1115-Q1 devices ( ADS111x-Q1) are precision, low-power, 16-bit, I2C-compatible, analog-to-digital converters (ADCs) offered in VSSOP-10 and UQFN-10 packages. The ADS111x-Q1 devices incorporate a low-drift voltage reference and an oscillator. The ADS1114-Q1 and ADS1115-Q1 also incorporate a programmable gain amplifier (PGA) and a digital comparator. These features, along with a wide operating supply range, make the ADS111x-Q1 well suited for power- and space-constrained, sensor measurement applications.

The ADS111x-Q1 perform conversions at data rates up to 860 samples per second (SPS). The PGA offers input ranges from ±256 mV to ±6.144 V, allowing precise large- and small-signal measurements. The ADS1115-Q1 features an input multiplexer (MUX) that allows two differential or four single-ended input measurements. Use the digital comparator in the ADS1114-Q1 and ADS1115-Q1 for under- and overvoltage detection.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request