0
dsPIC33FJ06GS202A
  • dsPIC33FJ06GS202A
  • dsPIC33FJ06GS202A
  • dsPIC33FJ06GS202A
  • dsPIC33FJ06GS202A

dsPIC33FJ06GS202A

In Production

These devices offer features supporting common, multi-loop digital switch-mode power supplies (SMPS) and other digital power-conversion applications such as: AC to DC Converters, DC to DC Converters, Power Factor Correction (PFC), Uninterruptible power supply (UPS), Inverters, Embedded Power-Supply Controllers, Circuit Breakers, Arc Fault Detection, Digital Lighting

Microchip Technology dsPIC33FJ06GS202A Product Info

16 April 2026 0

Parameters

ADC Resolution (bits)

10

ADC Sampling Rate (ksps)

2000

ADC Modules

1

CAN/CAN-FD

0

Type of CAN module

None

Configurable Logic Cell (CLC/CCL)

0

CPU

dsPIC® DSC

CPU Speed (MIPS/DMIPS)

40

Number of Comparators

2

DAC Resolution (Bits)

10

DAC Outputs

1

Number of DACs

2

Hardware RTCC/RTC

No

Number of PWM Time Bases

2

Operation Voltage Max.(V)

3.6

Operation Voltage Min.(V)

3

Output Compare Channels

1

SMPS

4

Segmented LCD (# of segments)

0

USB

None

Program Memory size (KB)

6

Peripheral Pin Select / Pin Muxing

Yes

Direct Memory Access (DMA) Channels

0

Multiple Flash Panels

No

Graphics Controller/GPU

No

Motor Control PWM Outputs

4

Quadrature Encoder Interface

0

Low Power

No

ADC Channels

6

Pincount

28

Crypto Engine

No

TempRange Min

-40

TempRange Max

125

Features

    Operating Conditions
  • 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
    Core: 16-Bit dsPIC33F CPU
  • Code Efficient (C and Assembly) Architecture
  • Two 40-Bit Wide Accumulators
  • Single-Cycle (MAC/MPY) with Dual Data Fetch
  • Single-Cycle Mixed-Sign MUL plus Hardware Divide
  • 32-Bit Multiply Support
    Clock Management
  • ±2% Internal Oscillator
  • Programmable PLLs and Oscillator Clock Sources
  • Fail-Safe Clock Monitor (FSCM)
  • Independent Watchdog Timer (WDT)
  • Fast Wake-up and Start-up
    Power Management
  • Low-Power Management modes (Sleep, Idle, Doze)
  • Integrated Power-on Reset and Brown-out Reset
  • 2.0 mA/MHz Dynamic Current (typical)
  • 135 µA IPD Current (typical)
    High-Speed PWM
  • Up to Three PWM Pairs with Independent Timing
  • Dead Time for Rising and Falling Edges
  • 1.04 ns PWM Resolution for Dead Time, Duty Cycle, Phase and Frequency
  • PWM Support for: DC/DC, AC/DC, Inverters, PFC and Lighting
  • Programmable Fault Inputs
  • Flexible Trigger Configurations for ADC Conversions
    Advanced Analog Features
  • Two High-Speed Comparators with Direct Connection to the PWM module
  • ADC module: 10-bit resolution with Successive Approximation Register (SAR) converter (2 Msps) and three Sample-and-Hold (S&H) circuits
  • Up to 8 input channels grouped into four conversion pairs, plus two inputs for monitoring voltage references
  • Flexible and independent ADC trigger sources
  • Dedicated Result register for each analog channel
    Timers/Output Compare/Input Capture
  • Two 16-Bit General Purpose Timers/Counters
  • Input Capture module
  • Output Compare module
  • Peripheral Pin Select (PPS) to allow Function Remap
    Communication Interfaces
  • UART module (10 Mbps): With support for LIN/J2602 protocols and IrDA®
  • 4-Wire SPI module
  • I2C™ module (up to 1 Mbaud) with SMBus Support
  • PPS to allow Function Remap

Description

These devices offer features supporting common, multi-loop digital switch-mode power supplies (SMPS) and other digital power-conversion applications such as: AC to DC Converters, DC to DC Converters, Power Factor Correction (PFC), Uninterruptible power supply (UPS), Inverters, Embedded Power-Supply Controllers, Circuit Breakers, Arc Fault Detection, Digital Lighting

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request