DSC Operation:
• 3.0V to 3.6V, -40°C to +85°C, DC to 70 MHz
• 3.0V to 3.6V, -40°C to +125°C, DC to 60 MHz
• 3.0V to 3.6V, -40°C to +150°C, DC to 40 MHz

MOSFET Gate Driver Operation: 6.5V to 29.0V, -40°C to +150°C

CPU:
• Modified Harvard Architecture
• C Compiler Optimized Instruction Set
• 16-bit Wide Data Path
• 24-bit Wide Instructions
• 16x16 Integer Multiply Operations
• 32/16 and 16/16 Integer Divide Operations
• Two 40-bit Accumulators with Rounding and Saturation Options
• Single-Cycle Multiply and Accumulate
• Single-Cycle shifts for up to 40-bit Data
• 16x16 Fractional Multiply/Divide Operations

Motor Control PWM Module (MCPWM):
• Three PWM pairs with independent timing
• Dead time for rising and falling edges
• 7.14 ns PWM resolution
• Feature support for Inverters, PFC, Lighting, BLDC, PMSM, ACIM, SRM
• Programmable Fault inputs
• Flexible trigger configurations for ADC conversions

Quadrature Encoder Interface (QEI) Module:
• 32-bit optical/incremental encoder interface

Analog-to-Digital Converter Module (ADC):
• Configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H

Up to three Op amp/Comparators:
• Op Amps outputs internally connected to the ADC Module
• Additional dedicated comparator
• Programmable references with 32 voltage points for comparators

Peripheral Trigger Generator (PTG) for scheduling complex sequences

Charge Time Measurement Unit (CTMU) supports mTouch™ capacitive touch sensing

Up to 12 Timers:
• Five General Purpose 16-bit and up to two 32-bit timers/counters
• Four Output Compare Modules configurable as timers/counters
• PTG Module with two configurable 16-bit timers/counters
• QEI Module configurable as a 32-bit timer/counter

Four Input Capture Modules

Two UART modules (15 Mbps)

Two 4-wire SPI modules (15 Mbps)

Two I2C™ modules (up to 1 Mbaud) with SMBus support

4-channel DMA with user-selectable priority arbitration:
• DMA support for UART, SPI, ADC, IC, OC, and GP Timer Modules

Peripheral Pin Select (PPS) enables function remapping

Programmable Cyclic Redundancy Check (CRC)

Packages: 52VQFN

Microchip’s dsPIC33EDV64MC205 motor control System in Package (SiP) combines a digital signal controller (DSC) with a full-bridge MOSFET gate driver designed for 3-phase BLDC motor control.   The 70 MHz 16-bit dsPIC® DSC with DSP, advanced motor control PWMs, 12-bit A/D converter and integrated op amps and comparators is designed to run Field Oriented Control, providing the maximum energy efficiency and the lowest system cost.  The full-bridge gate driver controls 6 external NMOS FETs and includes an integrated charge pump for low-voltage operation, programmable dead-time, and comprehensive protection circuits.  The SiP can be powered by a single power supply up to 29V (operation) and 40V (transient) with the dsPIC DSC powered by an internal 3.3V LDO voltage regulator.  Automotive applications include cooling fans, gas, oil and water pumps, compressors, valves, actuators, and turbo chargers.  Industrial and commercial applications include power tools, kitchen appliances and white goods.