0
ZL40252
  • ZL40252

ZL40252

In Production

CREATE AND SAMPLE YOUR CUSTOM ZL40252 HERE The ZL40252 is a 10-output programmable fanout buffer with multi-format I/O and dividers  offers the ability to create multiple copies of a clock signal and distribute them among several loads with minimal additive jitter. The ZL40252 features an intuitive graphical user interface (GUI) and the ability to create factory pre-programmed devices with ease using Microsemi’s web tool, miClockDesigner. These pre-programmed devices—which have pin-selectable configurations at power-up—ensure clock availability and proper system bring-up for all applications....

Microchip Technology ZL40252 Product Info

16 April 2026 11

Parameters

Description

Fanout Buffer

Input

LVPECL, HCSL, LVDS, SSTL, CML, LVCMOS

Output

LVDS, LVPECL, HCSL, CMOS, HSTL

Supply Voltage

2.5/3.3

Max Freq (GHz)

1

Icc (mA)

0

Max Within Device Skew (ps)

100

OE

True

Input Mux

True

Number Of Outputs

10

PCIe Gen

1,2,3,4

Buffer Type

Fanout

Fanout

1:10

Features

  • Four Flexible Input Clocks: one crystal/CMOS input, two differential/CMOS inputs, one single-ended/CMOS input
  • Any input frequency up to 1GHz (300MHz for CMOS)
  • Manual clock switching by pin or register
  • 10 Universal Output Clocks with Dividers
  • Each output has independent divider
  • Low additive jitter <200fs RMS (12kHz-20MHz, for input frequencies above 100MHz)
  • Each output configurable as LVDS, LVPECL, HCSL, 2xCMOS or HSTL
  • In 2xCMOS mode, the P and N pins can be different frequencies (e.g. 125MHz and 25MHz)
  • Multiple output supply voltage banks with CMOS output voltages from 1.5V to 3.3V
  • Precise output alignment circuitry from GPIO pin or register bit
  • Per-output skew adjustment
  • Per-output enable/disable and glitchless start/stop (stop high or low)
  • Automatic self-configuration at power-up from internal EEPROM; up to 8 configurations pin-selectable
  • PCIe 1, 2, 3, 4 compliant
  • Four multi-purpose I/O pins
  • SPI or I2C processor Interface
  • Core supply voltage options: 2.5V only, 3.3V only, 1.8V+2.5V or 1.8V+3.3V
  • Space-saving 8x8mm QFN56 (0.5mm pitch)
  • Easy-to-use evaluation/programming software

Description

CREATE AND SAMPLE YOUR CUSTOM ZL40252 HERE

The ZL40252 is a 10-output programmable fanout buffer with multi-format I/O and dividers  offers the ability to create multiple copies of a clock signal and distribute them among several loads with minimal additive jitter.

The ZL40252 features an intuitive graphical user interface (GUI) and the ability to create factory pre-programmed devices with ease using Microsemi’s web tool, miClockDesigner. These pre-programmed devices—which have pin-selectable configurations at power-up—ensure clock availability and proper system bring-up for all applications.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request