• Four Flexible Input Clocks: one crystal/CMOS input, two differential/CMOS inputs, one single-ended/CMOS input
• Any input frequency up to 1GHz (300MHz for CMOS)
• Manual clock switching by pin or register
• 6 Universal Output Clocks with Dividers
• Each output has independent divider
• Low additive jitter <200fs RMS (12kHz-20MHz, for input frequencies above 100MHz)
• Each output configurable as LVDS, LVPECL, HCSL, 2xCMOS or HSTL
• In 2xCMOS mode, the P and N pins can be different frequencies (e.g. 125MHz and 25MHz)
• Multiple output supply voltage banks with CMOS output voltages from 1.5V to 3.3V
• Precise output alignment circuitry from GPIO pin or register bit
• Per-output skew adjustment
• Per-output enable/disable and glitchless start/stop (stop high or low)
• Automatic self-configuration at power-up from internal EEPROM; up to 8 configurations pin-selectable
• PCIe 1, 2, 3, 4 compliant
• Four multi-purpose I/O pins
• SPI or I2C processor Interface
• Core supply voltage options: 2.5V only, 3.3V only, 1.8V+2.5V or 1.8V+3.3V
• Space-saving 8x8mm QFN56 (0.5mm pitch)
• Easy-to-use evaluation/programming software

CREATE AND SAMPLE YOUR CUSTOM ZL40251 HERE

ZL40251 6-output programmable fanout buffer with multi-format I/O and dividers  offers the ability to create multiple copies of a clock signal and distribute them among several loads with minimal additive jitter.

The ZL40251 features an intuitive graphical user interface (GUI) and the ability to create factory pre-programmed devices with ease using Microsemi’s web tool, miClockDesigner. These pre-programmed devices—which have pin-selectable configurations at power-up—ensure clock availability and proper system bring-up for all applications.