0
ZL40241
  • ZL40241

ZL40241

In Production

The ZL40241 is a pin-controlled, low-additive jitter, low-power 3 x 10 LVCMOS ePPS fanout buffer. Two inputs can accept signals in differential formats (LVPECL, SSTL, LVDS, HSTL, CML) or single-ended formats (LVPECL or LVCMOS), and the third input can accept a single-ended signal or be used to build a crystal oscillator by connecting an external crystal resonator between its XIN and XOUT pins.The ZL40241 has ten LVCMOS outputs that can be powered from 3.3V, 2.5V, 1.8V, or 1.5V supplies. Outputs can be enabled or disabled synchronously using the OE pin.The device operates on a 2.5V+/-5% or 3.3V+/-5% power supply. Its operation is guaranteed across the industrial temperature range of -40°C to +85°C....

Microchip Technology ZL40241 Product Info

16 April 2026 4

Parameters

Buffer Type

Fanout

Fanout

1:10

Icc (mA)

0

Input

1 XTAL/SE, 2 D/SE

InputMux

1

Output Frequency (Max) (GHz)

0.2

Max Prop Delay (ps)

2770

Max Within Device Skew (ps)

27

No. of outputs

10

OE

1

Output

LVCMOS

Supply Voltage

2.5/3.3

Features

  • 3 to 1 input Multiplexer: Two inputs accept any differential (LVPECL, HCSL, LVDS, SSTL, CML, LVCMOS) or a single ended signal and the third input accepts a crystal or a single ended signal
  • Supports frequencies from 0 to 200MHz
  • Ten 1.5V/1.8V/2.5V/3.3V LVCMOS outputs
  • Supports crystals from 8MHz to 60MHz
  • Ultra-low additive jitter: 17fs (12kHz to 20MHz)
  • Ultra-low noise floor of -170dBc/Hz
  • Supports 2.5V or 3.3V power supplies
  • Output to output skew of 30ps (typical)
  • Input to output delay of 2ns (typical)
  • 1PPS and ePPS clock buffer on Timing Module
    • Applications
    • General purpose clock distribution
    • Low jitter clock trees
    • Logic translation
    • Clock and data signal restoration
    • Wired and wireless communications
    • High performance microprocessor clock distribution
    • Medical imaging
    • Test equipment

    Description

    The ZL40241 is a pin-controlled, low-additive jitter, low-power 3 x 10 LVCMOS ePPS fanout buffer. Two inputs can accept signals in differential formats (LVPECL, SSTL, LVDS, HSTL, CML) or single-ended formats (LVPECL or LVCMOS), and the third input can accept a single-ended signal or be used to build a crystal oscillator by connecting an external crystal resonator between its XIN and XOUT pins.

    The ZL40241 has ten LVCMOS outputs that can be powered from 3.3V, 2.5V, 1.8V, or 1.5V supplies. Outputs can be enabled or disabled synchronously using the OE pin.

    The device operates on a 2.5V+/-5% or 3.3V+/-5% power supply. Its operation is guaranteed across the industrial temperature range of -40°C to +85°C.

    Subscribe to Welllinkchips !
    Your Name
    * Email
    Submit a request