• Transmit driver provides output pre-emphasis to extend transmission range
• 4 selectable pre-emphasis levels
• Drives 6.4Gbps up to 12" FR4 PCB trace, or longer combinations of FR4+cable+interconnect
• DC through 6.4Gbps data rate throughput
• Integrated loopback capability
• Programmable pre-emphasis magnitude
• Programmable pre-emphasis duration
• Internal termination to VTTIN pin interfaces to any differential AC- or DC-coupled signals
• 50O source terminated CML outputs minimize round-trip reflections
• Programmable output swing control: 200mV-3.0VPP
• Output Disable and output shutdown
• DC-offset control with VTTI/O
• 3.3V ±10% supply voltage
• 0°C to +70°C temperature range
• Available in 32-pin (5mm x 5mm) QFN package

The SY58626L high-speed, low jitter transmit buffer is optimized for backplane and transmission line data-path management applications in Automatic Test Equipment (ATE) and Test & Measurement (T&M) systems. The buffer includes a CML compatible, variable swing output with selectable pre-emphasis. The SY58626L is capable of driving serial data from DC through 6.4Gbps with a 3VPP (1.5VPK single ended) differential swing.The SY58626L differential input includes Micrel's unique, 3-pin input termination architecture that directly interfaces to any DC- or AC-coupled, differential signal as small as 100mVPK without any termination resistor networks in the signal path. The outputs are 50Ω source-terminated CML with a programmable output swing from 200mVPP to 3VPP(100mVPK to 1.5VPK).The SY58626L includes an output stage that provides 4 levels of pre-emphasis. The output pre-emphasis level is programmed with a three-bit interface. Unlike other transmitter solutions, the output pre-emphasis duration can be programmed from 60ps to 400ps.The SY58626L operates at 3.3V ±10% supply and is guaranteed over the commercial temperature range of 0°C to +70°C. The SY58626L transmitter is optimized to work with the SY58627L receiver. The SY58626L is part of Micrel's high-speed, Precision Edge® product line.