0
PLA133-97
  • PLA133-97

PLA133-97

In Production

The PLA133-97 is an advanced fanout buffer designed for automotive high performance, low-power, small form factor applications. The PLA133-97 accepts a reference clock input from DC to 150 MHz and provides nine outputs of the same frequency with ultra-low additive jitter. The device is AEC-Q100 qualified. The PLA133-97 is offered in a small 3 mm x 3 mm wettable flank QFN-16L package. The PLA133-97 outputs can be disabled to a high impedance (tri-state) by pulling low the OE pin. When the OE pin is high, the outputs are enabled and follow the REF input signal. When the OE pin is left open, a pull-up resistor on the chip will default the OE pin to logic 1 so the outputs are enabled. CLK8 is a free running output that remains enabled when the OE pin is pulled low. 6-output PLA133-67 https:...

Microchip Technology PLA133-97 Product Info

16 April 2026 2

Parameters

Description

1:9 CMOS Fanout Buffer 1.8-3.3V

Input

LVCMOS

Output

LVCMOS

Supply Voltage

1.8/2.5/3.3

Max Freq (GHz)

0.15

Icc (mA)

0

Max Within Device Skew (ps)

250

OE

True

Input Mux

False

Input (MHz)

DC

Number Of Outputs

9

Buffer Type

Fanout

Fanout

1:9

Max Prop Delay (ps)

9200

Features

  • Automotive AEC-Q100 Qualified
  • 1:9 LVCMOS Output Fanout Buffer from DC to150 MHz
  • Low Additive Phase Jitter of 60 fs RMS
  • 8 mA Output Drive Strength
  • Automotive Applications Grade 1 Compliant
  • Low Input-Output Delay
  • Output-Output Skew <250 ps
  • 2.5V to 3.3V, ±10% Operation
  • 1.8V ±5% Operation up to 67 MHz
  • Wide Temperature Range: –40°C to +125°C
  • Available in 16-Pin wettable flank QFN Package
  • Automotive Applications
    • ADAS Vision System
    • Infotainment and Dashboard

Description

The PLA133-97 is an advanced fanout buffer designed for automotive high performance, low-power, small form factor applications. The PLA133-97 accepts a reference clock input from DC to 150 MHz and provides nine outputs of the same frequency with ultra-low additive jitter. The device is AEC-Q100 qualified. The PLA133-97 is offered in a small 3 mm x 3 mm wettable flank QFN-16L package.

The PLA133-97 outputs can be disabled to a high impedance (tri-state) by pulling low the OE pin. When the OE pin is high, the outputs are enabled and follow the REF input signal. When the OE pin is left open, a pull-up resistor on the chip will default the OE pin to logic 1 so the outputs are enabled.

CLK8 is a free running output that remains enabled when the OE pin is pulled low.

6-output PLA133-67 https://www.microchip.com/wwwproducts/en/PLA133-67  and 4 output PLA133-47 https://www.microchip.com/wwwproducts/en/PLA133-47 are also available.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request