0
PLA133-67
  • PLA133-67

PLA133-67

In Production

The PLA133-67 is an advanced fanout buffer designed for automotive and other high performance, low-power, small form factor applications. The PLA133-67 accepts a reference clock input from DC to 150 MHz and provides six outputs of the same frequency with ultra-low additive jitter. The device is AEC-Q100 qualified. The PLA133-67 is available in a TSSOP-16L package. The PLA133-67 outputs can be disabled to a high impedance (tri-state) by pulling low the OE pin. When the OE pin is high, the outputs are enabled and follow the REF input signal. When the OE pin is left open, a pull-up resistor on the chip will default the OE pin to logic 1 so the outputs are enabled. 4-output PLA133-47 https://www.microchip.com/wwwproducts/en/PLA133-47 and 9 output PLA133-97 https://www.microchip.com/wwwproduc...

Microchip Technology PLA133-67 Product Info

16 April 2026 4

Parameters

Description

1:6

Input

LVCMOS

Output

LVCMOS

Supply Voltage

1.8/2.5/3.3

Max Freq (GHz)

0.15

Icc (mA)

30

Max Within Device Skew (ps)

250

OE

True

Input Mux

False

Number Of Outputs

6

Buffer Type

Fanout

Fanout

1:6

Max Prop Delay (ps)

9200

Features

  • Automotive AEC-Q100 Qualified
  • 1:6 LVCMOS Output Fanout Buffer from DC to150 MHz
  • Low Additive Phase Jitter of 60 fs RMS
  • 8 mA Output Drive Strength
  • Automotive Applications Grade 1 Compliant
  • Low Input-Output Delay
  • Output-Output Skew <250 ps
  • 2.5V to 3.3V, ±10% Operation
  • 1.8V ±10% Operation up to 67 MHz
  • Wide Temperature Range: –40°C to +125°C
  • Available in 16-Pin TSSOP Package
  • Automotive Applications:
    • ADAS Vision System
    • Infotainment and Dashboard

Description

The PLA133-67 is an advanced fanout buffer designed for automotive and other high performance, low-power, small form factor applications. The PLA133-67 accepts a reference clock input from DC to 150 MHz and provides six outputs of the same frequency with ultra-low additive jitter. The device is AEC-Q100 qualified. The PLA133-67 is available in a TSSOP-16L package.

The PLA133-67 outputs can be disabled to a high impedance (tri-state) by pulling low the OE pin. When the OE pin is high, the outputs are enabled and follow the REF input signal. When the OE pin is left open, a pull-up resistor on the chip will default the OE pin to logic 1 so the outputs are enabled.

4-output PLA133-47 https://www.microchip.com/wwwproducts/en/PLA133-47 and 9 output PLA133-97 https://www.microchip.com/wwwproducts/en/PLA133-97 are also available.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request