0
PL123-09
  • PL123-09

PL123-09

Not Recommended for new designs

The PL123-05/-09 (-05H/-09H for High Drive) are high performance, low skew, low jitter zero delay buffers designed to distribute high speed clocks. They have one (PL123-05) or two (PL123-09) low-skew output banks, of 4 outputs each, that are synchronized with the input. The PL123-09 allows control of the banks of outputs by using the S1 and S2 inputs as shown in the Selector Definition table on page 2 of the datasheet.The synchronization is established via CLKOUT feed back to the input of the PLL. Since the skew between the input and output is less than ±100ps, the device acts as a zero delay buffer. The input output propagation delay can be advanced or delayed by adjusting the load on the CLKOUT pin.These parts are not intended for 5V input-tolerant applications....

Microchip Technology PL123-09 Product Info

16 April 2026 2

Parameters

Buffer Type

Zero Delay

Fanout

1:9

Icc (mA)

0

Input

LVCMOS

Input (MHz)

10-134

InputMux

0

Output Frequency (Max) (GHz)

0

Max Within Device Skew (ps)

250

No. of outputs

9

OE

0

Output

LVCMOS

Features

  • Frequency Range 10MHz to 134MHz
  • 9 outputs PL123-09
  • Zero input - output delay
  • Standard (8mA) PL123-05/-09
  • High (12mA) PL123-05H/-09H
  • 3.3V ±10% operation
  • Available in Commercial and Industrial temperature ranges
  • Available in 16-Pin SOP or TSSOP packages

Description

The PL123-05/-09 (-05H/-09H for High Drive) are high performance, low skew, low jitter zero delay buffers designed to distribute high speed clocks. They have one (PL123-05) or two (PL123-09) low-skew output banks, of 4 outputs each, that are synchronized with the input. The PL123-09 allows control of the banks of outputs by using the S1 and S2 inputs as shown in the Selector Definition table on page 2 of the datasheet.The synchronization is established via CLKOUT feed back to the input of the PLL. Since the skew between the input and output is less than ±100ps, the device acts as a zero delay buffer. The input output propagation delay can be advanced or delayed by adjusting the load on the CLKOUT pin.These parts are not intended for 5V input-tolerant applications.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request