0
PIC32MX254F128D
  • PIC32MX254F128D
  • PIC32MX254F128D

PIC32MX254F128D

In Production

The PIC32MX25x family brings lower power run, sleep and deep sleep currents to the PIC32MX family, while increasing the frequency of 28 and 44 pin devices up to 72Mhz.  These devices are available in 128K and 256K Flash variants, and both with and without FS USB. Target applications include Audio and low cost graphics. 

Microchip Technology PIC32MX254F128D Product Info

16 April 2026 0

Parameters

Part Family

PIC32MX2xx

CPU Type

32-Bit MIPS MCU

MaxSpeed (MHz)

72

Program Memory Size (KB)

128

SRAM (KB)

32

Temp. Range Min.

-40

Temp. Range Max.

105

Operation Voltage Min.(V)

2.5

Operation Voltage Max.(V)

3.6

SPI

2

I2C

2

UART

2

Crypto Engine

No

Internal Oscillator

1

Pin Count

44

Features

  • Up to 72 MHz/116 DMIPS, MIPS32® M4K® core
  • eXtreme Low Power (XLP) Sleep and Deep Sleep 
  • USB 2.0-compliant Full-speed OTG controller
  • Two I2S/SPI modules for Codec and serial communications
  • Peripheral Pin Select (PPS) functionality
  • Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces
  • mTouch™ Capacitive touch
  • Temperature Range - 40°C to 105°C
  • Operating voltage range of 2.3V to 3.6V
  • 128KB Flash memory (plus an additional 12 KB of Boot Flash)
  • 32KB SRAM memory
  • MIPS16e® mode for up to 40% smaller code size
  • Low-power management modes (Sleep and Idle) Peripheral Features
  • Peripheral Pin Select (PPS) functionality to allow function remap
  • Two additional DMA channels dedicated to USB
  • Two  UARTs (12.5 Mbps) and two I2C™ modules
  • Hardware Real-Time Clock and Calendar (RTCC)
  • Five 16-bit and up to two 32-bit Timers/Counters
  • Five Capture inputs and Five Compare/PWM outputs Audio/Graphics/Touch HMI Features
  • External graphics interface
  • Audio data communication: I2S, LJ, RJ, USB
  • Audio data control interface: SPI and I2C™
  • Generation of fractional clock frequencies
  • Can be synchronized with USB clock
  • Can be tuned in run-time
  • Supports mTouch™ capacitive touch sensing Advanced Analog Features
  • 10-bit 1Msps rate with one Sample and Hold (S&H)
  • 13 analog inputs
  • Can operate during sleep mode
  • Flexible and independent ADC trigger sources
  • Three dual-input Comparator modules
  • In-circuit and in-application programming
  • 4-wire MIPS® Enhanced JTAG interface
  • Unlimited program and six complex data breakpoints
  • IEEE 1149.2-compatible (JTAG) boundary scan
  • MPLAB X Integrated Development Environment (IDE)
  • MPLAB Harmony Integrated Software Framework

Description

The PIC32MX25x family brings lower power run, sleep and deep sleep currents to the PIC32MX family, while increasing the frequency of 28 and 44 pin devices up to 72Mhz.  These devices are available in 128K and 256K Flash variants, and both with and without FS USB. Target applications include Audio and low cost graphics. 

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request