0
PIC32CX1025MTG128
  • PIC32CX1025MTG128

PIC32CX1025MTG128

In Production

PIC32CX1025MTG is a system-on-chip solution built around a 32-bit Arm® Cortex®-M4F RISC processor, well suited for application such as communication modules and split meter systems. PIC32CX1025MTG runs at a maximum speed of 200 MHz and embeds 1 Mbyte of embedded Flash, 256 Kbytes of SRAM and 16 Kb of Instruction and 8 Kb of Data Cache/Tightly Coupled Memory (TCM) on-chip.A Secure Boot and secure key storage coupled with advanced cryptographic/Hash hardware accelerators, such as ECC, RSA, AES12/256 and SHA256/512, support the different encryption and authentication protocols. ...

Microchip Technology PIC32CX1025MTG128 Product Info

16 April 2026 5

Parameters

ADC Channels

6

ADC Resolution

12

Analog Comparator

Yes

Anti-Tampering Inputs

3

Crypto Engine

AES/CPKCC/ICM(SHA)/TRNG

Flash (kBytes)

1024

Max I/O Pins

102

Operating Voltage Max. (V)

3.6

Operating Voltage Min (Vcc)

2.25

PWM Channels

3

QSPI

Yes

SPI/TWI/UART

8x4-wire

SRAM

256

Secure Boot

Yes

Segment LCD

up to 8x32

Temp# Range Max (deg C)

85

Temp# Range Min (deg C)

-40

Timers

12

UART

2

Features

  • 200 MHz Single Core Cortex-M4F + MPU
  • 512KB-1MB-2MB Dual Bank/Dual Boot Flash with 1M+ Cycle Endurance
  • Up to 256kB Multi Port SRAM
  • Quad IO SPI with Encrypted XIP
  • Ultra-Low Power in RTC mode
  • Advanced HW Crypto Features
  • - ECC, RSA
  • - AES256, SHA512, TRNG
  • - Secure Key Storage
  • - Secure Boot
  • 3x Anti-Tampering IOs in Back Up Domain
  • Single 32KHz Crystal Operation
  • Up to 8*32 SLCD Controller
  • Advanced HW LR/NLR code isolation IP to support MID/Welmec requirements
  • Comes with Microchip certified PLC-G3 and Prime 1.3/1.4 stack
  • CAVP certified
  • Support of Microchip MPLAB X IDE & Harmony, IAR & KEIL
  • Available in eTQFP128 package
  • Description

    PIC32CX1025MTG is a system-on-chip solution built around a 32-bit Arm® Cortex®-M4F RISC processor, well suited for application such as communication modules and split meter systems. PIC32CX1025MTG runs at a maximum speed of 200 MHz and embeds 1 Mbyte of embedded Flash, 256 Kbytes of SRAM and 16 Kb of Instruction and 8 Kb of Data Cache/Tightly Coupled Memory (TCM) on-chip.

    A Secure Boot and secure key storage coupled with advanced cryptographic/Hash hardware accelerators, such as ECC, RSA, AES12/256 and SHA256/512, support the different encryption and authentication protocols. 

    Subscribe to Welllinkchips !
    Your Name
    * Email
    Submit a request