PIC18F27Q10

In Production

PIC18F27Q10 microcontrollers are optimized for robust, real time control and sensor nodes with integrated intelligent analog, configurable peripherals and 5V operation for increased noise immunity. They are well suited for a broad range of applications including industrial control, consumer, automotive, touch sensing and Internet of Things (IoT). These 28-pin devices deliver Core Independent Peripherals such as CLC, CWG, WWDT, CRC/Memory Scan, Hardware CVD, Zero-Cross Detect and Peripheral Pin Select, providing for increased design flexibility and lower system cost.PIC18 Q10 Product Family OverviewCheck out the code examples in MPLAB XpressCheck out the code examples in GitHubFunctional Safety:This product is recommended for safety critical applications targeting both ...

Microchip Technology PIC18F27Q10 Product Info

16 April 2026 0

Parameters

Program Memory Size (KB)	128
RAM	3615
Data EEPROM (bytes)	1024
Pin Count	28
Operation Voltage Max.(V)	5.5
Operation Voltage Min.(V)	1.8
ADC Resolution Max	10
ADC Channels	24
Zero Cross Detect	True
Number of Comparators	2
SPI	2
I2C	2
Stand alone PWM	2
Low Power	Yes
Numerically Controlled Oscillator (NCO)	0
Data Signal Modulator (DSM)	1

Features

PIC18 Core with 83 Instructions, 31 Stack Levels

Internal 64MHz oscillator

Operating Voltage Range:- 1.8V – 5.5V

Temperature Range:- Industrial Version (-40C to 85C)- Extended Version (-40C to 125C)

128 KB Flash Program Memory with self read/write capability

3615 Bytes Data SRAM Memory

1024 Bytes of EEPROM

10-bit ADC with computation, 24 channels

8 x Configurable Logic Cell (CLC)

1 x 5-bit DAC

2 x Comparators

Fixed Voltage Reference (FVR) module - 1.024V, 2.048V and 4.096V output levels

Hardware Capacitive Voltage Divider (CVD) for mTouch buttons/sliders

1 x Zero-Cross Detect

1 x I2C/SPI

1 x EUSART with LIN support

CRC with Memory Scan

Windowed Watchdog Timer (WWDT)

1 x Hardware Limit Timer (HLT)

1 x Complementary Waveform Generator

2 x standalone 10-bit PWM modules

2 x Capture/Compare/PWM modules

Three 8-bit Timers/Counters

Four 16-bit Timers/Counters

1 x Hardware Limit Timer (HLT)

Extended Watchdog Timer (WDT)

Doze, Idle, and Sleep Power Saving Operating Modes

Low Current Power-on Reset (POR)

Brown-out Reset (BOR)

Low-Power BOR (LPBOR)

Peripheral Pin Select

In-Circuit Debug Integrated On-Chip

In-Circuit Serial Programing (ICSP) via Two Pins

Description

PIC18F27Q10 microcontrollers are optimized for robust, real time control and sensor nodes with integrated intelligent analog, configurable peripherals and 5V operation for increased noise immunity. They are well suited for a broad range of applications including industrial control, consumer, automotive, touch sensing and Internet of Things (IoT). These 28-pin devices deliver Core Independent Peripherals such as CLC, CWG, WWDT, CRC/Memory Scan, Hardware CVD, Zero-Cross Detect and Peripheral Pin Select, providing for increased design flexibility and lower system cost.

PIC18 Q10 Product Family Overview

Check out the code examples in MPLAB Xpress

Check out the code examples in GitHub

Functional Safety:

This product is recommended for safety critical applications targeting both industrial and automotive products (IEC 61508 and ISO 26262). Necessary documentation such as FMEDA report and Safety Manual can be provided on request. Certified development tools are also available for this product. Please contact your local Microchip sales office or your distributor for more information.

Subscribe to Welllinkchips !

Your Name

* Email

ELECTRONIC COMPONENTS
All In One Distributor

PIC18F27Q10

Microchip Technology PIC18F27Q10 Product Info

Parameters

Features

Description

SUBMITTED SUCCESSFULLY！

ELECTRONIC COMPONENTS All In One Distributor

PIC18F27Q10

Microchip Technology PIC18F27Q10 Product Info

Parameters

Features

Description

SUBMITTED SUCCESSFULLY！

ELECTRONIC COMPONENTS
All In One Distributor