• 8 independent PoE channels
• Complies with IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt
• Drives 2-pair power ports or 4-pair ports (combining 2 PoE channels)
• Single DC voltage input (32V to 57V) w/ built in 3.3V and 5V regulators
• Input voltage out of range protection, voltage monitoring / protection
• Wide ambient temperature range: -40°C to +85°C
• On-chip over-temperature thermal protection and monitoring
• Low power dissipation (0.1O sense resistor and 0.2O MOSFET Rdson per channel)
• Power soft start mechanism, Internal power on reset
• Can be cascaded up to 12 PoE devices (96 physical ports)
• Detailed port status
• Programmable threshold temperature alarm limit
• Interrupt out pin for system and port events
• Forced port power ON function
• Port power limit setting, port matrix and priority
• PD69208M: 56-pin, 8 mm x 8 mm QFN package
• MSL3, RoHS compliant

The PoE manager IC integrates power, analog, and state-of-the-art logic into a single 56-pin, plastic QFN package. The device is used in Ethernet switches and midspans to allow network devices to share power and data over the same cable. The PD69208M device is an 8-port, mixed-signal, and high-voltage PoE driver. Together with the PD692x0 external MCU, it performs as a PSE system. The PoE controller, PD692x0, is a cost-effective, pre-programmed MCU designed to implement enhanced mode PoE. PD69208M supports supply voltages between 32V and 57V without additional power supply sources. A system that powers over four pairs can be implemented by combining two ports of PD69208M, enabling a high-power delivery to compatible PD devices. An on-going monitoring of system parameters for the host software is available via communication. Internal thermal protection is implemented in the chip. PD69208M is a low-power dissipation device that uses internal MOSFETs and internal 100 mΩ sense resistors. PD69208M is available in a 56 pin, 8 mm x 8 mm QFN package.