• -110dBm sensitivity at 1kbps with 0.1% BER
• Supports bit rates up to 20kbps at 433.92MHz
• 25dB image-reject mixer
• No IF filter required
• 60dB analog RSSI output range
• 3.0V to 3.6V supply voltage range
• 4.3mA supply current at 315MHz
• 6.0mA supply current at 434MHz
• 0.1µA supply current in shutdown mode
• Data output squelch until valid bits detected
• 16-pin QSOP package (4.9mm x 6.0mm)
• -40°C to +105°C temperature range
• 3kV HBM ESD Rating

The MICRF220 is a 300MHz to 450MHz super-heterodyne, image-reject, RF receiver with automatic gain control, ASK/OOK demodulator, analog RSSI output, and integrated squelch features.  It only requires a crystal and a minimum number of external components to implement.  The MICRF220 is ideal for low-cost, low-power, RKE, TPMS, and remote actuation applications. 

The MICRF220 achieves -110dBm sensitivity at a bit rate of 1kbps with 0.1% BER.  Four demodulator filter bandwidths are selectable in binary steps from 1625Hz to 13kHz at 433.92MHz, allowing the device to support bit rates up to 20kbps.  The device operates from a supply voltage of 3.0V to 3.6V, and typically consumes 4.3mA of supply current at 315MHz and 6.0mA at 433.92MHz.  A shutdown mode reduces supply current to 0.1µA typical.  The squelch feature decreases the activity on the data output pin until valid bits are detected while maintaining overall receiver sensitivity.