0
MIC4416
  • MIC4416

MIC4416

In Production

The MIC4416 and MIC4417 IttyBitty™ low-side MOSFET gate drivers are designed to switch an N-Channel enhancement-type MOSFET from a TTL-compatible control signal in low-side switch applications. The MIC4416 is noninverting and the MIC4417 is inverting. These drivers feature short delays and high peak current to produce precise edges and rapid rise and fall times. Their tiny 4-lead SOT-143 package uses minimum space. The MIC4416/7 is powered from a 4.5 V to 18 V supply voltage. The on-state gate drive output voltage is approximately equal to the supply voltage (no internal regulators or clamps). High supply voltages, such as 10 V, are appropriate for use with standard N-Channel MOSFETs. Low supply voltages, such as 5 V, are appropriate for use with logic-level N-Channel MOSFETs. In a low-sid...

Microchip Technology MIC4416 Product Info

16 April 2026 0

Parameters

Capacitive Load Drive

1000 pF in 24 ns

MOSFET Driver Type

Low Side

Supply Voltage Max V (volt)

18

Peak Sink Current A (ampere)

1.2

Peak Source Current A (ampere)

1.2

Propagation Delay tD1 ns (nanosecond)

42

Propagation Delay tD2 ns (nanosecond)

42

Sink Resistance Ω (ohm)

3.5

Source Resistance Ω (ohm)

3.5

Fall Time tF ns (nanosecond)

16

Rise Time tR ns (nanosecond)

14

# of Outputs

1

Output Type

Non-inverting

Integrated MOSFETs

External

Peak Low-Side Source Current (Ampere)

1.2

Supply Voltage Min V (volt)

4.5

Low-Side Source Resistance Typ (Ohms) Ω (ohm)

3.5

Low-Side Sink Resistance Typ (Ohms) Ω (ohm)

3.5

Low-Side Rise Time (ns)

14

Low-Side Fall Time (ns)

16

Low-Side Turn-On Prop Delay (ns)

33

Low Side Turn-off Propagation delay (ns)

23

Temp Range (T-Junction) Min °C (degrees Celsius)

-40

Temp Range (T-Junction) Max °C (degrees Celsius)

125

Temp Range (T-Ambient) Min °C (degrees Celsius)

-40

Temp Range (T-Ambient) Max °C (degrees Celsius)

85

Output Configuration

Low-Side

Features

  • 4.5 V to 18 V operation
  • Low steady-state supply current
  • 50 µA typical, control input low
  • 370 µA typical, control input high
  • 1.2 A nominal peak output
  • 3.5 Ω typical output resistance at 18 V supply
  • 7.8 Ω typical output resistance at 5 V supply
  • 25 mV maximum output offset from supply or ground
  • Operates in low-side switch circuits
  • TTL-compatible input withstands -20 V
  • ESD protection
  • Inverting and non-inverting versions
  • Description

    The MIC4416 and MIC4417 IttyBitty™ low-side MOSFET gate drivers are designed to switch an N-Channel enhancement-type MOSFET from a TTL-compatible control signal in low-side switch applications. The MIC4416 is noninverting and the MIC4417 is inverting. These drivers feature short delays and high peak current to produce precise edges and rapid rise and fall times. Their tiny 4-lead SOT-143 package uses minimum space. The MIC4416/7 is powered from a 4.5 V to 18 V supply voltage. The on-state gate drive output voltage is approximately equal to the supply voltage (no internal regulators or clamps). High supply voltages, such as 10 V, are appropriate for use with standard N-Channel MOSFETs. Low supply voltages, such as 5 V, are appropriate for use with logic-level N-Channel MOSFETs. In a low-side configuration, the driver can control a MOSFET that switches any voltage up to the rating of the MOSFET. The MIC4416 is available in the SOT-143 package and is rated for -40°C to + 85°C ambient temperature range.

    Subscribe to Welllinkchips !
    Your Name
    * Email
    Submit a request