0
In Production
Capacitive Load Drive |
1,000 pF in 27 ns |
MOSFET Driver Type |
Synchronous |
Supply Voltage Max V (volt) |
16 |
Peak Sink Current A (ampere) |
2 |
Peak Source Current A (ampere) |
3 |
Propagation Delay tD1 ns (nanosecond) |
60 |
Propagation Delay tD2 ns (nanosecond) |
75 |
Sink Resistance Ω (ohm) |
1.5 |
Source Resistance Ω (ohm) |
2.5 |
Fall Time tF ns (nanosecond) |
6 |
Rise Time tR ns (nanosecond) |
10 |
# of Outputs |
2 |
Integrated MOSFETs |
External |
Peak High-Side Source Current (Ampere) |
2 |
Peak Low-Side Source Current (Ampere) |
2 |
Peak High-Side Sink Current (Ampere) |
3 |
Supply Voltage Min V (volt) |
9 |
Bootstrap Supply Voltage Max V (volt) |
116 |
High-Side Source Resistance Typ (Ohms) |
2.5 |
Low-Side Source Resistance Typ (Ohms) Ω (ohm) |
2.5 |
High-Side Sink Resistance Typ (Ohms) |
1.375 |
Low-Side Sink Resistance Typ (Ohms) Ω (ohm) |
1.125 |
High-Side Rise Time (ns) |
10 |
Low-Side Rise Time (ns) |
10 |
High-Side Fall Time (ns) |
6 |
Low-Side Fall Time (ns) |
6 |
High-Side Turn-On Prop Delay (ns) |
30 |
Low-Side Turn-On Prop Delay (ns) |
30 |
High-Side Turn-Off Propagation Delay (ns) |
45 |
Low Side Turn-off Propagation delay (ns) |
36 |
Temp Range (T-Junction) Min °C (degrees Celsius) |
-40 |
Temp Range (T-Junction) Max °C (degrees Celsius) |
125 |
Output Configuration |
Half-Bridge |
The MIC4102 is a high frequency, 100 V Half Bridge MOSFET gate driver IC featuring internal anti-shoot-through protection. The low-side and high-side gate drivers are controlled by a single input signal to the PWM pin. The MIC4102 implements adaptive anti-shoot-through circuitry to optimize the switching transitions for maximum efficiency. The single input control also reduces system complexity and greatly simplifies the overall design. The MIC4102 also features a low-side drive disable pin. This gives the MIC4102 the capability to operate in a non-synchronous buck mode. This feature allows the MIC4102 to start up into applications where a bias voltage may already be present without pulling the output voltage down. Under-voltage protection on both the low-side and high-side supplies forces the outputs low. An on-chip bootstrap diode eliminates the discrete diode required with other driver ICs. The MIC4102 is available in the SOIC-8L package with a junction operating range from -40°C to +125°C.