Product
0
MIC2810
  • MIC2810

MIC2810

In Production

The MIC2810 is a high performance power management IC, integrating a 2MHz DC/DC switcher with two 300mA LDOs. The MIC2810 features a LowQ® mode, reducing the total current draw while in this mode to less than 30µA. In LowQ®mode, the output noise of the DC/DC converter is 53µVrms , significantly lower than other converters that use a PFM light load mode that can interfere with sensitive RF circuitry.The MIC2810 is a µCap design, operating with very small ceramic output capacitors and inductors for stability, therefore, reducing required board space and component cost. Also, checkout MPU power solutions with MIC2810. Go to Treelinktool under DC/DC converters and MPU Power for further information....

Microchip Technology MIC2810 Product Info

16 April 2026 0

Parameters

Target Application

MPU

Target Processor

SAMA5D2

VIN Max V (volt)

5.5

VIN Min (V) V (volt)

2.7

# of Regulated Outputs (Bucks)

1

Maximum Buck Output I (A)

0.6

Buck Switching Typ Frequency (kHz)

2000

Duty Cycle Max (%)

100

# of Regulated Outputs (Linear)

2

Maximum LDO Output I (mA)

300

RESET Output

Yes

Auto PFM Mode

No

ϴja (°C/W)

56

Features

  • 2MHz DC/DC converter and two LDOs
  • 30µA Total IQ when in LowQ® mode
  • Thermal shutdown protection
  • Current limit protection
  • 2.7V to 5.5V input voltage range
  • 600mA DC/DC converter output current in PWM mode
  • 53µVrms output noise in LowQ® mode
  • 2MHz PWM operation in normal mode
  • LDO output voltage down to 0.8V
  • 1.65V to 5.5V LDO 1 & 2 input voltage range
  • 300mA LDO output current
  • 2.7V to 5.5V LDO 3 input voltage range

    • Description

    The MIC2810 is a high performance power management IC, integrating a 2MHz DC/DC switcher with two 300mA LDOs. The MIC2810 features a LowQ® mode, reducing the total current draw while in this mode to less than 30µA. In LowQ®mode, the output noise of the DC/DC converter is 53µVrms , significantly lower than other converters that use a PFM light load mode that can interfere with sensitive RF circuitry.The MIC2810 is a µCap design, operating with very small ceramic output capacitors and inductors for stability, therefore, reducing required board space and component cost.

    Also, checkout MPU power solutions with MIC2810. Go to Treelinktool under DC/DC converters and MPU Power for further information.

    Subscribe to Welllinkchips !
    Your Name
    * Email
    Popular Posts
    Featured Parts More >
    Submit a request
    CONTACT US
    Company address

    WELL LINK CHIPS GROUP CO.,LIMITED FLAT/RM 1802 BEVERLY HOUSE 93-107 LOCKHART ROAD WANCHAI HK

    Send Enquiry
    SEND e-MAIL
    Office hour from 9am to 6pm ,
    Monday through Friday, UTC/GMT +8