0
In Production
Target Application |
Multi-platform |
Target Processor |
N/A |
VIN Max V (volt) |
5.5 |
VIN Min (V) V (volt) |
2.7 |
# of Regulated Outputs (Bucks) |
1 |
Maximum Buck Output I (A) |
0.6 |
Buck Switching Typ Frequency (kHz) |
2000 |
Duty Cycle Max (%) |
100 |
# of Regulated Outputs (Linear) |
2 |
Maximum LDO Output I (mA) |
300 |
RESET Output |
Yes |
Auto PFM Mode |
No |
ϴja (°C/W) |
45 |
The MIC2800 is a high performance power management IC, giving three output voltages with maximum efficiency. Integrating a 2MHz DC/DC converter with an LDO post regulator, the MIC2800 gives two high efficiency outputs with a second, 300mA LDO for maximum flexibility. The MIC2800 features a LowQ® mode, reducing the total current draw while in this mode to less than 30µA. In LowQ® mode, the output noise of the DC to DC converter is 75µVRMS, significantly lower than other converters which use a PFM light load mode that can interfere with sensitive RF circuitry.The DC to DC converter uses small values of L and C to reduce board space but still retains efficiencies over 90% at load currents up to 600mA.The MIC2800 is a μCap design, operating with very small ceramic output capacitors and inductors for stability, reducing required board space and component cost.
Also, checkout MPU power solutions with MIC2800. Go to Treelinktool under DC/DC converters and MPU Power for further information.
WELL LINK CHIPS GROUP CO.,LIMITED FLAT/RM 1802 BEVERLY HOUSE 93-107 LOCKHART ROAD WANCHAI HK
