0
MIC23250
  • MIC23250
  • MIC23250

MIC23250

In Production

The MIC23250 is a high efficiency 4MHz dual 400mA synchronous buck regulator with HyperLight Load® mode. HyperLight Load® provides very high efficiency at light loads and ultra-fast transient response which is perfectly suited for supplying processor core voltages. An additional benefit of this proprietary architecture is very low output ripple voltage throughout the entire load range with the use of small output capacitors. The devices is designed for use with a 1µH inductor and a 4.7µF output capacitor that enables a sub-1mm height. The MIC23250 has a very low quiescent current of 33µA with both outputs enabled and can achieve over 85% efficiency at 1mA. At higher loads the MIC23250 provides a constant switching frequency around 4MHz while providing peak e...

Microchip Technology MIC23250 Product Info

16 April 2026 0

Parameters

Target Application

Multi-platform

Target Processor

N/A

VIN Max V (volt)

5.5

VIN Min (V) V (volt)

2.7

# of Regulated Outputs (Bucks)

2

Maximum Buck Output I (A)

0.4

Buck Switching Typ Frequency (kHz)

4000

Duty Cycle Max (%)

100

# of Regulated Outputs (Linear)

0

Maximum LDO Output I (mA)

0

RESET Output

No

Auto PFM Mode

No

ϴja (°C/W)

65

Features

  • Input voltage range: 2.7V to 5.5V
  • Dual output current 400mA
  • Up to 94% peak efficiency and 85% efficiency at 1mA
  • 33µA dual quiescent current
  • 1µH inductor with a 4.7µF capacitor
  • 4MHz in PWM operation
  • Ultra fast transient response
  • 20mVpp ripple in HyperLight Load® mode
  • 3mV output voltage ripple in full PWM mode
  • 0.01µA shutdown current
  • -40°C to +125°C junction temperature range
  • Description

    The MIC23250 is a high efficiency 4MHz dual 400mA synchronous buck regulator with HyperLight Load® mode. HyperLight Load® provides very high efficiency at light loads and ultra-fast transient response which is perfectly suited for supplying processor core voltages. An additional benefit of this proprietary architecture is very low output ripple voltage throughout the entire load range with the use of small output capacitors.

    The devices is designed for use with a 1µH inductor and a 4.7µF output capacitor that enables a sub-1mm height.

    The MIC23250 has a very low quiescent current of 33µA with both outputs enabled and can achieve over 85% efficiency at 1mA. At higher loads the MIC23250 provides a constant switching frequency around 4MHz while providing peak efficiencies up to 94%

    The MIC23250 is designed to operate over the junction operating range from -40°C to +125°C.

    Subscribe to Welllinkchips !
    Your Name
    * Email
    Submit a request