0
MCP6285
  • MCP6285
  • MCP6285
  • MCP6285

MCP6285

In Production

The Microchip Technology Inc. MCP6281/1R/2/3/4/5 family of operational amplifiers (op amps) provide wide bandwidth for the current. This family has a 5 MHz Gain Bandwidth Product (GBWP) and a 65° phase margin. This family also operates from a single supply voltage as low as 2.2V, while drawing 450 µA (typical) quiescent current. Additionally, the MCP6281/1R/2/3/4/5 supports rail-to-rail input and output swing, with a common mode input voltage range of VDD + 300mV to VSS – 300 mV. This family of operational amplifiers is designed with Microchip’s advanced CMOS process. The MCP6285 has a Chip Select (CS) input for dual op amps in an 8-pin package. This device is manufactured by cascading the two op amps (the output of op amp A connected to the non-inverting input of op amp B). The CS input p...

Microchip Technology MCP6285 Product Info

16 April 2026 0

Parameters

CMRR Min (dB)

65

Enhanced EMI Protection

No

Gain Bandwidth Product kHz (kilohertz)

5000

Iq Max (uA)

570

Input Voltage Noise Density (nV/rt(Hz))

16

Iq Typical (µA)

450

Operating Voltage Max V (volt)

6.0

Operating Voltage Min V (volt)

2.2

PM (deg)

65

PSRR Min (dB)

70

# Per Package

2

Slew Rate (V/µs)

2.5

Vos Max µV (microvolt)

3000

Features

  • 5 MHz Gain Bandwidth Product (typ.)
  • Supply Current: IQ = 450 µA (typ.)
  • Supply Voltage: 2.2V to 6V
  • Rail-to-Rail Input/Output
  • Extended Temperature Range: -40°C to +125°C
  • Available in Single, Dual and Quad Packages
  • Single with Chip Select (CS) (MCP6283)
  • Dual with Chip Select (CS) (MCP6285)
  • Package Types: PDIP, SOIC, MSOP

Description

The Microchip Technology Inc. MCP6281/1R/2/3/4/5 family of operational amplifiers (op amps) provide wide bandwidth for the current. This family has a 5 MHz Gain Bandwidth Product (GBWP) and a 65° phase margin. This family also operates from a single supply voltage as low as 2.2V, while drawing 450 µA (typical) quiescent current. Additionally, the MCP6281/1R/2/3/4/5 supports rail-to-rail input and output swing, with a common mode input voltage range of VDD + 300mV to VSS – 300 mV. This family of operational amplifiers is designed with Microchip’s advanced CMOS process. The MCP6285 has a Chip Select (CS) input for dual op amps in an 8-pin package. This device is manufactured by cascading the two op amps (the output of op amp A connected to the non-inverting input of op amp B). The CS input puts the device in Low-power mode. The MCP6281/1R/2/3/4/5 family operates over the Extended Temperature Range of -40°C to +125°C.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request