0
MCP6274
  • MCP6274
  • MCP6274
  • MCP6274

MCP6274

In Production

The Microchip Technology Inc. MCP6271/1R/2/3/4/5 family of operational amplifiers (op amps) provide wide bandwidth for the current. This family has a 2 MHz Gain Bandwidth Product (GBWP) and a 65° Phase Margin. This family also operates from a single supply voltage as low as 2.0V, while drawing 170 µA (typical) quiescent current. The MCP6271/1R/2/3/4/5 supports rail-to-rail input and output swing, with a common mode input voltage range of VDD + 300mV to VSS – 300mV. This family of op amps is designed with Microchip’s advanced CMOS process. The MCP6275 has a Chip Select input (CS) for dual op amps in an 8-pin package and is manufactured by cascading two op amps (the output of op amp A connected to the non-inverting input of op amp B). The CS input puts the device in low power mode....

Microchip Technology MCP6274 Product Info

16 April 2026 10

Parameters

CMRR Min (dB)

65

Enhanced EMI Protection

No

Gain Bandwidth Product kHz (kilohertz)

2000

Iq Max (uA)

240

Input Voltage Noise Density (nV/rt(Hz))

20

Iq Typical (µA)

170

Operating Voltage Max V (volt)

6.0

Operating Voltage Min V (volt)

2.0

PM (deg)

65

PSRR Min (dB)

70

# Per Package

4

Slew Rate (V/µs)

0.9

Vos Max µV (microvolt)

3000

Features

  • Input Offset Voltage: ±3 mV (max)
  • Quiescent Current: 170 µA (typical)
  • Common Mode Rejection Ratio: 65 dB (typical)
  • Power Supply Rejection Ratio: 70 dB (typical)
  • Rail-to-Rail Input/Output
  • Supply Voltage Range: 2V to 6V
  • Gain Bandwidth Product: 2 MHz (typical)
  • Slew Rate: 0.9V/µs (typical)
  • Unity Gain Stable
  • Extended Temperature Range: -40°C to +125°C

Description

The Microchip Technology Inc. MCP6271/1R/2/3/4/5 family of operational amplifiers (op amps) provide wide bandwidth for the current. This family has a 2 MHz Gain Bandwidth Product (GBWP) and a 65° Phase Margin. This family also operates from a single supply voltage as low as 2.0V, while drawing 170 µA (typical) quiescent current. The MCP6271/1R/2/3/4/5 supports rail-to-rail input and output swing, with a common mode input voltage range of VDD + 300mV to VSS – 300mV. This family of op amps is designed with Microchip’s advanced CMOS process. The MCP6275 has a Chip Select input (CS) for dual op amps in an 8-pin package and is manufactured by cascading two op amps (the output of op amp A connected to the non-inverting input of op amp B). The CS input puts the device in low power mode.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request