• Supports CAN 2.0 and CAN with Flexible Data Rate CAN FD) Physical Layer Transceiver Requirements
• Maximum propagation delay: 120 ns
• Loop delay symmetry: ±10% (2 Mbps)
• Wake-up on Pattern (WUP), as specified in ISO11898-2:2015, 3.6 µs activity filter time
• Implements ISO11898-2:2003, ISO11898-5:2007, and ISO/DIS11898-2:2015
• Qualification: AEC-Q100 Rev. G, Grade 0 (-40°C to +150°C)
• Very Low Standby Current (4 µA, typical)
• An unpowered node or brown-out event will not load the CAN bus
• Device is unpowered if VDD or VIO drop below its POR level
• Permanent Dominant detection on TXD
• Permanent Dominant detection on bus
• Automatic Thermal Shutdown Protection
• Suitable for 12V and 24V Systems
• Conducted emissions @ 2 Mbps with Common-Mode Choke (CMC)
• Direct Power Injection (DPI) @ 2Mbps with CMC
• Radiated emissions @ 2Mbps without a CMC
• High Electrostatic Discharge (ESD) Protection on CANH and CANL, meeting IEC61000-4-2 up to ±13kV
• Extended (E): -40°C to +125°C
• High (H): -40°C to +150°C

The MCP2544WFD CAN transceiver is designed for high-speed CAN FD applications up to 8Mbps communication speed. The maximum propagation delay was improved to support longer bus length.The device meets the automotive requirements for CAN FD bit rates exceeding 2 Mbps, low quiescent current, electromagnetic compatibility (EMC) and electrostatic discharge (ESD).

For 12V applications please consider the ATA6560