0
HV9931
  • HV9931

HV9931

In Production

The HV9931 is a fixed frequency PWM controller IC designed to control an LED lamp driver using a single-stage PFC buckboost-buck topology. It can achieve a unity power factor and a very high step-down ratio that enables driving a single high-brightness LED from the 85-264VAC input without a need for a power transformer. This topology allows reducing the filter capacitors and using non-electrolytic capacitors to improve reliability. The HV9931 uses open-loop peak current control to regulate both the input and the output current. This control technique eliminates a need for loop compensation, limits the input inrush current, and is inherently protected from input under-voltage condition. Capacitive isolation protects the LED Lamp from failure of the switching MOSFET. HV9931 provides a low-...

Microchip Technology HV9931 Product Info

16 April 2026 0

Parameters

Topology

Buck

+Vin min (V)

8

+Vin max (V)

450

Output Current

External FET

Dimming

PWM

Package

SOIC

Product Type

Off Line

Operating Iq (µA)

0.5

Vfb (V)

0

Oja (C/W)

128

Extra LDOs

0

Vdropout (mV)

0

IQ LDO

0

Features

    • Constant output current
    • Large step-down ratio
    • Unity power factor
    • Low input current harmonic distortion
    • Fixed frequency or fixed off-time operation
    • Internal 450V linear regulator
    • Input and output current sensing
    • Input current limit
    • Enable, PWM and phase dimming

Description

The HV9931 is a fixed frequency PWM controller IC designed to control an LED lamp driver using a single-stage PFC buckboost-buck topology. It can achieve a unity power factor and a very high step-down ratio that enables driving a single high-brightness LED from the 85-264VAC input without a need for a power transformer. This topology allows reducing the filter capacitors and using non-electrolytic capacitors to improve reliability. The HV9931 uses open-loop peak current control to regulate both the input and the output current. This control technique eliminates a need for loop compensation, limits the input inrush current, and is inherently protected from input under-voltage condition. Capacitive isolation protects the LED Lamp from failure of the switching MOSFET. HV9931 provides a low-frequency PWM dimming input that can accept an external control signal with a duty ratio of 0-100% and a frequency of up to a few kilohertz. The PWM dimming capability enables HV9931 phase control solutions that can work with standard wall dimmers.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request