0
HV809
  • HV809
  • HV809

HV809

In Production

HV809 is an off-line, high voltage, EL lamp driver integrated circuit designed for driving EL lamps of up to 350nF at 400Hz. The input supply voltage can be a rectified nominal 120V AC source or any other DC source up to 200V. The HV809 will supply the EL lamp with an AC square wave with a peak-to-peak voltage of two times the input DC voltage. The HV809 has two internal oscillators, a low voltage output linear regulator, and a high voltage output H-bridge. The high voltage output H-bridge frequency is set by an external resistor connected between the REL-Osc and GND pins. The EL lamp is connected between pins VA and VB. For the HV809 in the 8-pin package, an external RC network can be connected between the oscillator’s Osc1 and Osc2 pins to pulse the EL lamp on and off. For detailed circ...

Microchip Technology HV809 Product Info

16 April 2026 0

Parameters

Type

Offline Driver

Input Voltage Low (V)

50

Input Voltage High (V)

200

Nominal Output Voltage (V)

±50 to ±200

Max Switch Resistance (Ω)

--

Output Regulation

--

Max Lamp Size per Device (in2)

100

Package

SOIC-8, SOIC-8 w/HS

Operating Iq (µA)

0

Frequency(EL, Typical)

320Hz - 480Hz

Oja (C/W)

101, 84

VOUT

400

Features

    • Processed with HVCMOS® technology
    • Input voltage up to 200V DC
    • 400V peak-to-peak output voltage
    • Output load up to 350nF (100in2 for 3.5nF/in2 lamp)
    • Adjustable output lamp frequency
    • Adjustable on/off pulsing frequency

Description

HV809 is an off-line, high voltage, EL lamp driver integrated circuit designed for driving EL lamps of up to 350nF at 400Hz. The input supply voltage can be a rectified nominal 120V AC source or any other DC source up to 200V. The HV809 will supply the EL lamp with an AC square wave with a peak-to-peak voltage of two times the input DC voltage. The HV809 has two internal oscillators, a low voltage output linear regulator, and a high voltage output H-bridge. The high voltage output H-bridge frequency is set by an external resistor connected between the REL-Osc and GND pins. The EL lamp is connected between pins VA and VB. For the HV809 in the 8-pin package, an external RC network can be connected between the oscillator’s Osc1 and Osc2 pins to pulse the EL lamp on and off. For detailed circuit and application information please refer to Application Note AN-H36.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request