Product
0
EQCO125X40
  • EQCO125X40

EQCO125X40

In Production

The EQCO125X40 is a CoaXPress 2.0 Transmitter/Receiver with integrated equalizer, CDR (reclocker) and Cable Driver. It is designed to transmit/receive signals on a single cable or PCB trace pair. In one direction an 8b/10b coded downlink signal is transmitted/received between 1.25 Gbps and 12.5 Gbps. In the opposite direction a lower speed 8b/10b coded uplink signal is transmitted/received at 20.833 Mbps or 41.666 Mbps. The EQCO125X40 can be used as a CoaXPress transmitter inside a camera, as a CoaXPress receiver inside a frame grabber and as a CoaXPress repeater inside an active coax cable or link.To compare this product to other Microchip CoaXPress 2.0 offerings, please see the CoaXPress 2.0 Product Comparison table....

Microchip Technology EQCO125X40 Product Info

16 April 2026 0

Parameters

Maximum Operational Voltage

1.25

Pin Count

16

PkgPitch

0.65mm pin pitch

PkgType

QFN

PkgSize

4x4

Device Power Consumption

125mW @1.25V

Max Storage Temp

150

Min Storage Temp

-65

Maximum Temperature

85

Minimum Temperature

-40

Features

  • 1.25 Gbps to 12.5Gbps Video Downlink
  • Up to 40Mbps Uplink for camera control
  • Supports distance up to 212m @ 1.25Gbps over RG11 Coax
  • Supports distance up to 40m @ 12.5Gbps over RG11 Coax
  • Enables nanosecond precise triggering for camera control
  • Also supports 8b/10b coding up to 12.5Gbps
  • Support power over coax cable up to 900mA DC
  • Supports new CoaXPress 2.0 Standard and backward compatible to CoaXPress 1.1 devices
  • Integrated cable driver, equalizer and CDR (clock data recovery) in a single device

    • Description

    The EQCO125X40 is a CoaXPress 2.0 Transmitter/Receiver with integrated equalizer, CDR (reclocker) and Cable Driver. It is designed to transmit/receive signals on a single cable or PCB trace pair. In one direction an 8b/10b coded downlink signal is transmitted/received between 1.25 Gbps and 12.5 Gbps. In the opposite direction a lower speed 8b/10b coded uplink signal is transmitted/received at 20.833 Mbps or 41.666 Mbps. The EQCO125X40 can be used as a CoaXPress transmitter inside a camera, as a CoaXPress receiver inside a frame grabber and as a CoaXPress repeater inside an active coax cable or link.

    To compare this product to other Microchip CoaXPress 2.0 offerings, please see the CoaXPress 2.0 Product Comparison table.

    Subscribe to Welllinkchips !
    Your Name
    * Email
    Popular Posts
    Featured Parts More >
    Submit a request
    CONTACT US
    Company address

    WELL LINK CHIPS GROUP CO.,LIMITED FLAT/RM 1802 BEVERLY HOUSE 93-107 LOCKHART ROAD WANCHAI HK

    Send Enquiry
    SEND e-MAIL
    Office hour from 9am to 6pm ,
    Monday through Friday, UTC/GMT +8