0
ATxmega256D3
  • ATxmega256D3
  • ATxmega256D3

ATxmega256D3

In Production

The high-performance, low-power 8/16-bit AVR® XMEGA® microcontroller combines 256 KB ISP Flash memory (8 KB boot code section) with read-while-write capabilities, 4 KB EEPROM, 16 KB SRAM, a four-channel event system, a programmable multi-level interrupt controller, 50 general purpose I/O lines, a 16-bit real-time counter, five flexible 16-bit timer/counters with compare modes and PWM, three USARTs, two Two-Wire interfaces, two serial peripheral interfaces, one 16-channel/12-bit A/D converter with optional differential input with programmable gain, two analog comparators with window mode, a programmable watchdog timer with separate internal oscillator, accurate internal oscillators with PLL and prescaler, and a programmable Brown-out Detection. The Program and Debug Interface (PDI)...

Microchip Technology ATxmega256D3 Product Info

16 April 2026 2

Parameters

Program Memory Size (KB)

256

RAM

16

Data EEPROM (bytes)

4096

Pin Count

64

Operation Voltage Max.(V)

3.6

Operation Voltage Min.(V)

1.6

ADC Resolution Max

12

ADC Channels

16

Zero Cross Detect

No

Number of Comparators

2

SPI

5

I2C

2

Stand alone PWM

18

Low Power

Yes

Numerically Controlled Oscillator (NCO)

0

Data Signal Modulator (DSM)

0

Description

The high-performance, low-power 8/16-bit AVR® XMEGA® microcontroller combines 256 KB ISP Flash memory (8 KB boot code section) with read-while-write capabilities, 4 KB EEPROM, 16 KB SRAM, a four-channel event system, a programmable multi-level interrupt controller, 50 general purpose I/O lines, a 16-bit real-time counter, five flexible 16-bit timer/counters with compare modes and PWM, three USARTs, two Two-Wire interfaces, two serial peripheral interfaces, one 16-channel/12-bit A/D converter with optional differential input with programmable gain, two analog comparators with window mode, a programmable watchdog timer with separate internal oscillator, accurate internal oscillators with PLL and prescaler, and a programmable Brown-out Detection. The Program and Debug Interface (PDI), a fast 2-pin interface for programming and debugging, is available. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching one MIPS per MHz, balancing power consumption and processing speed.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request