0
ATmega329
  • ATmega329
  • ATmega329

ATmega329

In Production

The high-performance, low-power Microchip 8-bit AVR® RISC-based microcontroller combines 32 KB ISP Flash memory with read-while-write capabilities, 1 KB EEPROM, 2 KB SRAM, 54 general purpose I/O lines, 32 general purpose working registers, a JTAG interface for boundary-scan and on-chip debugging/programming, a complete on-chip LCD controller with internal contrast control, three flexible timer/counters with compare modes, internal and external interrupts, serial programmable USART, a universal serial interface (USI) with start condition detector, an 8-channel 10-bit A/D converter, programmable watchdog timer with internal oscillator, SPI serial port, and five software selectable power saving modes. The device operates between 1.8-5.5 volts. By executing powerful instructions in a sing...

Microchip Technology ATmega329 Product Info

16 April 2026 12

Parameters

Program Memory Size (KB)

32

RAM

2048

Data EEPROM (bytes)

1024

Pin Count

64

Operation Voltage Max.(V)

5.5

Operation Voltage Min.(V)

1.8

ADC Resolution Max

10

ADC Channels

8

Zero Cross Detect

No

Number of Comparators

1

SPI

2

I2C

1

Stand alone PWM

4

Low Power

No

Numerically Controlled Oscillator (NCO)

0

Data Signal Modulator (DSM)

0

Features

  • 4 x 25 Segment LCD Driver
  • 32KBytes In-System Self-programmable Flash Program Memory
  • 1Kbytes EEPROM
  • 2Kbytes Internal SRAM
  • Write/Erase Cycles: 10,000 Flash/100,000 EEPROM
  • Data retention: 20 years at 85°C/100 years at 25°C
  • Optional Boot Code Section with Independent Lock Bits

Description

The high-performance, low-power Microchip 8-bit AVR® RISC-based microcontroller combines 32 KB ISP Flash memory with read-while-write capabilities, 1 KB EEPROM, 2 KB SRAM, 54 general purpose I/O lines, 32 general purpose working registers, a JTAG interface for boundary-scan and on-chip debugging/programming, a complete on-chip LCD controller with internal contrast control, three flexible timer/counters with compare modes, internal and external interrupts, serial programmable USART, a universal serial interface (USI) with start condition detector, an 8-channel 10-bit A/D converter, programmable watchdog timer with internal oscillator, SPI serial port, and five software selectable power saving modes. The device operates between 1.8-5.5 volts.

By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching one MIPS per MHz, balancing power consumption and processing speed.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request