0
In Production
Frequency Range |
2.4 |
Operating Temp (°C) Min |
-40 |
Operating Temp (°C) Max |
85 |
Operating Voltage (V) Min |
2.7 |
Operating Voltage (V) Max |
3.6 |
Packages |
VQFN |
Pin Count |
48 |
Power Down Mode Current Consumption (uA) |
10.5 |
RX Current Consumption (mA) |
87 |
TX Current Consumption (mA) |
256 |
RX Sensitivity (dBm) |
-90 |
Wi-Fi Spec |
802.11 b/g/n |
SRAM (KB) |
548 |
Sleep Mode Current Consumption (μA) |
1 |
SoftAP Client Count |
1 |
TX Output Power (dBm) |
17.5 |
Downlink Throughput (Mbps) |
7 |
Uplink Throughput (Mbps) |
8 |
Wi-Fi Security |
WPA, WPA2, WEP |
Encryption |
WEP, WPA-TKIP, WPA2, CCMP-AES |
Bluetooth Spec |
5.0 |
Microchip's ATWINC3400-IC is an IEEE 802.11 b/g/n plus Bluetooth 5 Core Specification, Internet of Things (IoT) network controller IC. It is the ideal add-on to existing microcontroller (MCU) solutions, offering Wi-Fi® and Bluetooth® Low Energy (BLE) network capabilities through a SPI-to-Wi-Fi interface. The ATWINC3400 connects to any Microchip PIC® or SAM MCU with minimal resource requirements.
A MCU host driver can be found in the Advanced Software Framework (ASF) and in MPLAB Harmony v3.
The ATWINC3400’s most advanced mode is a single-stream 1 x 1 802.11n mode. The ATWINC3400 features a fully integrated power amplifier, LNA, switch and power management. The ATWINC3400 also features an on-chip processor and integrated Flash memory for system software with built-in coexistence mechanism for concurrent Wi-Fi and BLE functionality. The only external clock source needed for the ATWINC3400 is a high-speed crystal or oscillator. The ATWINC3400 is available in a 48-pin VQFN package with dimensions of 6x6mm.
Microchip's complimentary and confidential Wireless Check online design review service is available for customers who have selected our products for their application design-in*.
*The online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.
Click here for our Firmware Release Summary
Available in a fully-certified modules with u.FL connector or PCB antenna.