ATSAMD10D14

In Production

A low-power, high-performance ARM® Cortex®-M0+ based flash microcontroller, the Microchip's ATSAMD10D14 is ideal for a wide range of home automation, consumer, metering and industrial applications. It features:16KB of flash memory and 4KB of SRAMUp to 48MHz operating frequencyThree serial communication modules (SERCOM) configurable as UART/USART, SPI or I2C, two 16-bit timer/counters, 32-bit Real-Time Clock and calendar, 12 PWM channels, one 8- or 10-channel 12-bit ADC, one 10-bit DACSupports 7/12 self-capacitance touch channels in low/high pincount devicesSupports 72 mutual-capacitance touch channels1.62V to 3.63V power supplyEasy pin migration to SAMD10C devicesSupported by MPLAB X IDE and MPLAB Harmony....

Microchip Technology ATSAMD10D14 Product Info

16 April 2026 0

Parameters

CPU	Cortex-M0+
I2C	3
CPU Speed Max MHz (megahertz)	48
Operation Voltage Max.(V)	3.63
Operation Voltage Min.(V)	1.62
Internal Oscillator	32khz, 32Khz ULP, 8Mhz
Part Family	SAMD10
QSPI	0
U(S)ART	3 -UART
Program Memory size (KB)	16
Pincount	24
Crypto Engine	No
TempRange Min	-40
TempRange Max	105

Features

Single-cycle hardware multiplier

Micro Trace Buffer

16KB in-system self-programmable Flash

4KB SRAM Memory

Power-on reset (POR) and brown-out detection (BOD)

Internal and external clock options with 48MHDigital Frequency Locked Loop (DFLL48M) and 48MHto 96MHFractional

Digital Phase Locked Loop (FDPLL96M)

External Interrupt Controller (EIC)

8 external interrupts

One non-maskable interrupt

Two-pin Serial Wire Debug (SWD) programming, test and debugging interface

Idle and standby sleep modes

SleepWalking peripherals

6-channel Direct Memory Access Controller (DMAC)

6-channel Event System

One 16-bit TC with compare/capture channels

One 8-bit TC with compare/capture channels

One 32-bit TC with compare/capture channels, by using two TCs

Up to four compare channels with optional complementary output

Generation of synchronized pulse width modulation (PWM) pattern across port pins

Deterministic fault protection, fast decay and configurable dead-time between complementary output

Dithering that increase resolution with up to 5 bit and reduce quantization error

32-bit Real Time Counter (RTC) with clock/calendar function

Watchdog Timer (WDT)

CRC-32 generator

USART with full-duplex and single-wire half-duplex configuration

I2C Bus up to 3.4MHz

SMBUS/PMBUS

SPI

LIN client

Differential and single-ended input

1/2x to 16x programmable gain stage

Automatic offset and gain error compensation

Oversampling and decimation in hardware to support 13-, 14-, 15- or 16-bit resolution

10-bit, 350ksps Digital-to-Analog Converter (DAC)

Two Analog Comparators (AC) with window compare function

Up to 72-channel capacitive touch and proximity sensing

Up to 22 GPIO pins

24-pin QFN

20-pin SOIC

20-pin WLCSP

1.62V – 3.63V

Description

A low-power, high-performance ARM® Cortex®-M0+ based flash microcontroller, the Microchip's ATSAMD10D14 is ideal for a wide range of home automation, consumer, metering and industrial applications. It features:

16KB of flash memory and 4KB of SRAM
Up to 48MHz operating frequency
Three serial communication modules (SERCOM) configurable as UART/USART, SPI or I²C, two 16-bit timer/counters, 32-bit Real-Time Clock and calendar, 12 PWM channels, one 8- or 10-channel 12-bit ADC, one 10-bit DAC
Supports 7/12 self-capacitance touch channels in low/high pincount devices
Supports 72 mutual-capacitance touch channels
1.62V to 3.63V power supply
Easy pin migration to SAMD10C devices

Supported by MPLAB X IDE and MPLAB Harmony.

Subscribe to Welllinkchips !

Your Name

* Email

ELECTRONIC COMPONENTS
All In One Distributor

ATSAMD10D14

Microchip Technology ATSAMD10D14 Product Info

Parameters

Features

Description

SUBMITTED SUCCESSFULLY！

ELECTRONIC COMPONENTS All In One Distributor

ATSAMD10D14

Microchip Technology ATSAMD10D14 Product Info

Parameters

Features

Description

SUBMITTED SUCCESSFULLY！

ELECTRONIC COMPONENTS
All In One Distributor