0
In Production
ADC Resolution (bits) |
10 |
ADC Sampling Rate (ksps) |
440 |
Anti-Tampering Inputs |
0 |
Secure Bootloader |
No |
CAN/CAN-FD |
2 |
Type of CAN module |
CAN |
CPU Speed (MIPS/DMIPS) |
440 |
Camera Interface |
No |
Internal DRAM MB (megabyte) |
0 |
Ext. DRAM Bus |
16 |
Ext. DRAM Interface |
SDRAM/LPSDRAM/LPDDR/DDR2 |
Int. DRAM Type |
NONE |
Number of EBIs |
1 |
ECC bits on NAND interface |
24 |
Ethernet |
10/100 Base-TX Mac |
Number of Ethernet Ports |
2 |
FPU |
No |
Graphic LCD Interface |
No |
Hardware RTCC/RTC |
Yes |
I/O Pins Max |
105 |
Secure Key Storage (bits) |
0 |
L1 Cache Memory (Data) (KB) |
16 |
L1 Cache Memory (Instructions) (KB) |
16 |
LIN |
Yes |
CPU Speed Max MHz (megahertz) |
400 |
NAND Interface |
Yes |
Operation Voltage Max.(V) |
1.1 |
Operation Voltage Min.(V) |
0.9 |
Internal Oscillator |
No |
Part Family |
SAM9GX |
QSPI |
0 |
RAM KB (kilobyte) |
32 |
SDIO/SD-CARD/eMMC |
2 |
Temp. Sensor |
No |
Watch Dog Timer |
Yes |
Direct Memory Access (DMA) Channels |
20 |
Graphics Controller/GPU |
No |
Quadrature Encoder Interface |
0 |
ADC Channels |
12 |
Pincount |
217 |
Crypto Engine |
No |
TempRange Min |
-40 |
TempRange Max |
85 |
The Microchip SMART SAM9X25 is a high-performance ARM926-based embedded microprocessor unit, running at 400MHz and featuring multiple networking/connectivity peripherals, including two 2.0A/B compatible Controller Area Network (CAN) interfaces and two IEEE Std 802.3-compatible 10/100Mbps Ethernet MACs. Additional communication interfaces include a soft modem, High Speed USB Device and Host, Full Speed USB Host, two HS SDCard/SDIO/MMC interfaces, USARTs, SPIs, I2S, multiple TWIs and 10-bit ADC. The SAM9X25 offers a multi-layer bus matrix coupled with 2 x 8 central DMA channels and dedicated DMAs for the high-speed connectivity peripherals. The external bus interface incorporates controllers for SDRAM/LPSDRAM, DDR2/LPDDR and specific circuitry for MLC/SLC NAND Flash with integrated ECC. The SAM9X25 is available in a 217-ball BGA package with 0.8mm ball pitch.