0
S80KS2562GABHV023
  • S80KS2562GABHV023

S80KS2562GABHV023

Active and preferred

S80KS2562GABHV023 is a 256 Mb HYPERRAM self-refresh DRAM with a 1.8 V HYPERBUS DDR interface for high-bandwidth, low-pin-count memory expansion. It supports up to 200 MHz clock and 400 MBps throughput with 35 ns maximum access time. Configurable linear, wrapped (16/32/64/128 B), or hybrid bursts and deep power down to 15 b5A help optimize performance and standby power in embedded systems.

Infineon Technologies S80KS2562GABHV023 Product Info

16 April 2026 6

Parameters

Density

256 MBit

Family

KS-2

Initial Access Time

35 ns

Interface Bandwidth

400 MByte/s

Interface Frequency (SDR/DDR) (MHz)

- / 200

Interfaces

HYPERBUS

Lead Ball Finish

Sn/Ag/Cu

Operating Temperature range

-40 °C to 105 °C

Operating Voltage range

1.7 V to 2 V

Operating Voltage

1.8 V

Peak Reflow Temp

260 °C

Planned to be available until at least

See roadmap

Qualification

Industrial

Technology

HYPERRAM

Features

  • HYPERBUS interface, CS#, RESET#
  • 8-bit DQ[7:0] data bus
  • RWDS strobe + write data mask
  • DDR transfers on both clock edges
  • 200 MHz max clock, 35 ns tACC
  • Up to 400 MBps (3,200 Mbps)
  • Linear and wrapped burst (16-128 B)
  • Drive strength configurable
  • Self-refresh, partial array refresh
  • Interface standby ignores I/O
  • Hybrid sleep retains data, 3 b5s max
  • Deep power down stops refresh

Description

  • Easy MCU/FPGA RAM expansion
  • 8-bit bus cuts routing vs x16
  • RWDS simplifies timing + masking
  • DDR boosts bandwidth per pin
  • 200 MHz/35 ns reduces latency
  • 400 MBps supports fast graphics
  • Burst options optimize bus use
  • Drive tuning improves signal SI
  • Partial refresh lowers standby power
  • Standby reduces idle bus toggling
  • Hybrid sleep saves power, keeps data
  • DPD cuts current to b5A level

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request