0
S70KS1282GABHI020
  • S70KS1282GABHI020

S70KS1282GABHI020

Active and preferred

S70KS1282GABHI020 is a 128 Mb HYPERRAM™ self-refresh DRAM (PSRAM) with a HYPERBUS™ interface, CS#, RESET#, RWDS, and an 8-bit DDR data bus. It supports up to 200 MHz clock and up to 400 MBps (3,200 Mbps) throughput with configurable linear or wrapped bursts (16-128 bytes). The 1.8 V device operates from 1.7 V to 2.0 V over -40 to 85°C and is offered in a 24-ball FBGA (6 x 8 x 1.0 mm) package.

Infineon Technologies S70KS1282GABHI020 Product Info

16 April 2026 7

Parameters

Density

128 MBit

Family

KS-2

Initial Access Time

35 ns

Interface Bandwidth

400 MByte/s

Interface Frequency (SDR/DDR) (MHz)

- / 200

Interfaces

HYPERBUS

Lead Ball Finish

N/A

Operating Temperature range

-40 °C to 85 °C

Operating Voltage range

1.7 V to 2 V

Operating Voltage

1.8 V

Peak Reflow Temp

260 °C

Planned to be available until at least

See roadmap

Qualification

Industrial

Technology

HYPERRAM

Apps

Health and lifestyle, General purpose motor drive, Smart thermostat

Features

  • HYPERBUS interface
  • 1.7 V to 2.0 V VCC option
  • 2.7 V to 3.60 V VCC option
  • 8-bit DDR data bus (DQ[7:0])
  • 200 MHz maximum clock rate
  • Up to 400 MBps throughput
  • 35 ns maximum access time (tACC)
  • Wrapped bursts 16/32/64/128 B
  • RWDS strobe and write data mask
  • DCARS option shifts RWDS phase
  • Hybrid sleep retains data
  • Deep power down stops refresh

Description

  • High bandwidth with few pins
  • Fits 1.8 V or 3.0 V logic rails
  • DDR bus reduces system pin count
  • 200 MHz supports fast processors
  • 400 MBps feeds high-rate buffers
  • 35 ns tACC reduces read latency
  • Burst sizes match cache-line needs
  • RWDS eases DDR timing closure
  • DCARS improves read eye margin
  • Hybrid sleep cuts power, keeps data
  • DPD minimizes leakage when off
  • Clock-stop lowers stall current

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request